Ilson Paranhos Pasqualino

Instituição:

Universidade Federal do Rio de Janeiro

Centro:

Centro de Tecnologia

Unidade:

Escola Politécnica

Departamento:

Departamento de Engenharia do Petróleo/Poli

ORCID:

https://orcid.org/0000-0002-9958-2930


Formação:

  • Instituto Alberto Luiz Coimbra de Pós Graduação e Pesquisa de Engenharia

    Engenharia Oceânica | Doutorado | 1993 - 1998

  • Universidade Federal do Rio de Janeiro

    Engenharia Oceânica | Mestrado | 1989 - 1993

  • Escola de Engenharia

    Engenharia Naval | Graduação | 1984 - 1989
Laboratórios:
Nenhum laboratório cadastrado
Nuvens de Palavras:
Artigos:
Nenhum artigo cadastrado
Eventos:

(5.81% eventos com DOI)

Titulo DOI Ano
DECOMMISSIONING OF UMBILICALS AND FLEXIBLE PIPES - A SENSITIVITY ANALYSIS IN DECISION-MAKING PROCESS 2023
NUMERICAL ANALYSIS OF THE EFFICIENCY OF CORRODED PRESSURE VESSELS WITH COMPOSITE REPAIR 2022
Bucking Analysis of FPSO Panel under Pitting Corrosion 2022
Committee V.8: Subsea Technology 10.5957/ISSC-2022-COMMITTEE-V-8 2022
Evaluation of Composite Hull for Subsea Separator 2020
STUDY OF THE EFFICIENCY AND RELIABILITY OF PRESSURE VESSEL COMPOSITE REPAIR 2020
AN APPLICATION OF FAULT TREE ANALYSIS FOR DECOMMISSIONING OF SUBSEA FLEXIBLE PIPELINE IN BRAZIL 2019
AVALIAÇÃO DE CASCO EM MATERIAL COMPÓSITO PARA SEPARADOR SUBMARINO 2019
COMPARISON OF SPECTRAL FATIGUES METHODOLOGIES USING EQUIVALENT STRESSES OBTAINED BY MISES AND BATTELLE APPLIED TO A SEMI-SUBMERSIBLE PLATFORM 2019
STRESS CONCENTRATION FACTORS OF DAMAGED SHIP SIDE PANELS 2019
STRESS CONCENTRATION FACTORS ON WELDED TUBULAR JOINTS 2019
High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads: Part II 10.1115/OMAE2018-78752 2018
Biosurfactant Commercial Surfactant: Study on Effectiveness for Application in EOR 2018
Descomissionamento de Dutos Submarinos: Mapeamento de Processos para a Opção de Abandono In Situ 2018
Ultimate Compressive Strength Assessment of Damaged Plates 2017
Fatigue Assessment of Damaged Pipelines After Glass Fiber and Epoxy Matrix Laminate Repairs 2017
High cycle fatigue damage evaluation of steel pipelines based on microhardness changes during cyclic loads 2017
Fatigue Assessment of Damaged Pipelines After Glass Fiber and Epoxy Matrix Laminate Repairs 2017
High Cycle fatigue Damage Evaluation of Steel Pipelines Based on MIcrohardness Changes During Cyclic Loads 2017
Feasibility Study of a Subsea to Shore Production System 10.1115/OMAE2016-55108 2016
Technical Analysis of an Exploitation Scenario Employing the Subsea to Shore Concept Associated to Mexilhão Field 2016
Toward a Fatigue Life Assessment of Steel Pipes Based on X-Ray Diffraction Measurements 2015
Study of an Alternative Material for the Manufacture of Subsea Umbilical Hydraulic Hoses 10.1115/OMAE2015-41050 2015
Modelagem por Elementos Finitos do Ensaio de Indentação Instrumentada em Poli(fluoreto de vinilideno) 2015
Study of an Alternative Material for the Manufacture of Subsea Umbilical Hydraulic Hoses 2015
Pipeline Plain Dent Fatigue: A Comparison of Assessment Methodologies 10.1115/ipc2014-33034 2014
Numerical and Experimental Study of Damaged Sandwich Pipe Under External Pressure 2014
Modelo Elastoplástico-Viscoelástico para Polímero Semicristalino Aplicado na Indústria Do Petróleo 2014
Fatigue life study of damaged FPSO side panels under in-plane compression loads 2013
Stress Concentration Factors of Damaged FPSO Side Panels Under Cyclic Loads 2013
Stress Concentration Factors of Dented Rigid Risers 2013
Effective Shear Area in One Dimensional Ship Hull Finite Element Models to Predict Natural Frequencies of Vibration 2013
Stress Concentration Factors of Dented Rigid Risers Under Dynamic Bending 2013
Fadiga de painéis planos danificados de navios plataforma de produção 2013
Fadiga de Painéis Planos Danificados de Navios Plataforma de Produção 2012
Avaliação da Fadiga de Risers Rígidos Submetidos a Danos Mecânicos do Tipo Mossa 2012
X-Ray Diffraction Study of Microstructural Changes During Fatigue Damage in Steel Pipelines 2012
Numerical-Analytical Prediction of the Collapse of Flexible Pipes Under Bending and External Pressure 2012
X-ray Diffraction Study of Microstructural Changes During Fatigue Damage Initiation in Steel Pipes 2012
Evaluation de l?amorçage de l?endommagement par fatigue des tubes d'acier utilisés pour l'exploitation pétrolière 2011
Determinação de Parâmetros Viscoplásticos do Polifluoreto de Vinilideno 2011
Assessment of Fatigue Damage Initiation in Oil and Gas Steel Pipes 2011
Collapse Pressure of Reeled Rigid Pipes 2010
Influência da Temperatura no Comportamento Mecânico do Polifluoreto de Vinilideno 2009
Stress Concentration Factors of Longitudinal and Transverse Plain Dents on Steel Pipelines 2008
Collapse Mechanism of Unbounded Metal-Composite Pipes Under Hydrostatic Pressure 2008
Core Material Performance on the Propagation Pressure of Sandwich Pipes 2008
Análise Numérica em Tubos Metal-Compósito sob Carregamentos de Pressão Hidrostática para Aplicação Offshore 2008
Fatigue Life Analysis of Steel Pipelines with Plain Dents under Cyclic Internal Pressure 2008
Instability of Metal-Composite Pipes Under External Pressure 2007
Materials Selection for Sandwich Pipes under the Combined Effect of Pressure 2007
High Cycle Fatigue of Pipelines with Plain Dents - Simulations, Experiments and Assessment 2007
Collapse Pressure of Damaged sandwich Pipes 2007
Materiais Poliméricos para Dutos Sanduíche Aplicados em Águas Ultra-Profundas 2007
Estudo da Pressão de Colapso em Dutos Sanduíches Danificados 2007
High Cycle Fatigue Assessment of Pipelines with Plain Dents 2007
Análises Experimentais e Numéricas da Resistência Limite de Dutos Sanduíche sob Pressão Externa 2007
Experimental Analyses of Metal-Composite Pipes under External Pressure 2006
Stress Concentration Factors of Dented Pipelines 2006
Análise Experimental de Dutos Metal-Compósito sob Carregamento de Pressão Hidrostática 2006
Seleção de Materiais para a Camada Anular de Dutos Sanduíche 2006
Propagation of Buckles in Sandwich Pipes under External Pressure 2005
Propagação de Trincas em Defeitos de Soldas Circunferenciais de Risers Rígidos 2005
Strength Analyses of Liners for Horizontal Wells 2005
Assessment of Stress Concentration on Dented Pipelines 2005
Metal-Composite Pipes for Deepwater Applications 2005
The Effect of the Reeling Laying Method on the Collapse Pressure of Steel Pipes for Deepwater 2004
Validação de um Modelo Numérico do Colapso de Condutas Submarinas Sujeitas a Pressão Externa 2004
Fatigue Analysis of Aluminum Drill Pipes 2004
Arc-Length Method for Explicit Dynamic Relaxation 2004
Ultimate Strength of Aluminium Stiffened Panels 2004
Propagação de Trincas em Defeitos de Soldas Circunferenciais de Risers Rígidos 2004
Estudo Numérico-Experimental de Cascas Cilíndricas Tipo Alumínio + Material Compósito sob a Ação de Pressão Externa 2004
Limit States for Deepwater Flowlines and Risers - Review of the Research Activities at the Submarine Technology Laboratory /COPPE 2003
On the Deformation Mechanism of Reeled Pipes with Weld Defects: Experiments 2003
Crack Growth Prediction in Girth Welds of Steel Catenary Risers 2002
Comparative Structural Analyses Between Sandwich and steel Pipelines for Ultra-Deep Water 2002
Strength Analyses of Sandwich Pipes for Ultra-Deepwaters 2002
Failure Simulation of a Buried Pipeline Under Thermal Loading 2001
Ultimate Strength of Submersible Structures 2001
Propagation of Buckles in Thick Walled Pipelines for Ultra Deepwater Applications 2000
Resistência Limite de Painéis Planos sob Carregamento Biaxial 2000
Numerical Simulation of Buckle Propagation 1999
Simulação Numérica de Propagação de Colapso em Cascas Cilíndricas sob Pressão Hidrostática 1999
Stress Analysis of Casing String Submitted to Cyclic Steam Injection 1997
Colapso de Cascas Cilíndricas Enrijecidas sob Pressão Externa 1996
Publicações:
Minha Rede: