Bluma Guenther Soares
Instituição:
Universidade Federal do Rio de Janeiro
Centro:
Centro de Tecnologia
Unidade:
Instituto de Macromoléculas
Departamento:
Gabinete do Diretor/IMA
Formação:
-
Institut National des Sciences Appliquées de Lyon
| Pós-Doutorado | 2010 - 2010
-
Universite de l'Etat a Liege
| Pós-Doutorado | 1992 - 1993
-
Universidade Federal do Rio de Janeiro
Ciência e Tecnologia de Polímeros | Doutorado | 1981 - 1987
-
Universidade Federal do Rio de Janeiro
Química | Mestrado | 1974 - 1978
-
Universidade Federal do Rio de Janeiro
Químico | Graduação | 1970 - 1973
Laboratórios:
Nuvens de Palavras:
Artigos:
(84.41% artigos com DOI)
| Titulo | DOI | Ano |
|---|---|---|
| Anti-corrosive and self-healing properties of epoxy coatings loaded with montmorillonite modified with zinc-based ionic liquid | 10.1016/j.porgcoat.2023.108185 | 2024 |
| Functionalized liquid polyisoprene as a promising toughening agent for poly(lactic acid): Combining stiffness and toughness | 10.1002/app.55095 | 2024 |
| Hybrid carbonaceous filler as promising additives for EMI SE of PVDF-based composites: Comparison between monolayered and multilayered structures | 10.1016/j.flatc.2023.100603 | 2024 |
| Synthesis of silica bearing sulfobetaine and sulfonic groups and their electrorheological response | 10.1016/j.colsurfa.2023.133099 | 2024 |
| Enhancing anticorrosive performance of epoxy-based coatings using magnetite/graphene hybrids modified with ionic liquids | 10.1016/j.porgcoat.2024.108412 | 2024 |
| 10.1002/pat.6339 | 2024 | |
| copolymer loaded with / / hybrids: A flexible and lightweight material with high microwave absorption | 10.1002/app.55531 | 2024 |
| Polylactic acid/epoxidized linseed oil/polypropylene grafted maleic anhydride: A promising combination of toughness and rigidity | 10.1002/app.55533 | 2024 |
| The effect of inorganic particles on the breakdown strength and mechanical properties of -based composites | 10.1002/app.53403 | 2023 |
| Sandwich structures based on fused filament fabrication -printed polylactic acid honeycomb and poly(vinylidene fluoride) nanocomposites for microwave absorbing applications | 10.1002/pc.27240 | 2023 |
| Composites of EVA and hydrophobically modified PAMAM dendrimer: Effect of composition on crystallization and flow assurance of waxy systems | 10.1016/j.fuel.2022.125962 | 2023 |
| Transparent and superhydrophobic room temperature vulcanized (RTV) polysiloxane coatings loaded with different hydrophobic silica nanoparticles with self-cleaning characteristics | 10.1016/j.surfcoat.2023.129479 | 2023 |
| Low cost and easily scalable microwave absorbing material based on three-layer honeycomb sandwich structures | 10.1016/j.mtcomm.2023.105955 | 2023 |
| Epoxy networks modified with functionalized liquid polyisoprene rubbers with enhanced toughness and stiffness | 10.1007/s10973-022-11625-9 | 2023 |
| The influence of carbon nanotubes and exfoliated graphite nanoplatelets modified by phosphonium-based ionic liquids on polyurethane composites | 10.1002/app.54289 | 2023 |
| From Epoxy Prepolymers to Tunable Epoxy-Ionic Liquid Networks: Mechanistic Investigation and Thermo-Mechanical Properties | 10.1021/acsapm.3c00551 | 2023 |
| Flexible microwave absorbing composites based on polydimethylsiloxane filled with hybrid carbonaceous materials: Statistical analysis of the synergistic effect | 10.1002/pc.27426 | 2023 |
| Electromagnetic wave absorption, EMI shielding effectiveness and electrical properties of ethylene - vinyl Acetate (EVA)/ Polyaniline (PAni) blends prepared by in situ polymerization | 10.1016/j.synthmet.2023.117441 | 2023 |
| Alkyl phosphonium-based ionic liquids as promising additives for the corrosion protection of epoxy coatings in saline medium: Effect of the anion | 10.1002/app.54959 | 2023 |
| Poly(vinylidene fluoride) and thermoplastic polyurethane composites filled with carbon black-polypyrrole for electromagnetic shielding applications | 10.1002/pat.6184 | 2023 |
| Granitic quarry waste as a dual functional filler for high density polyethylene-based composites: Mechanical and microwave absorbing properties | 10.1002/app.51675 | 2022 |
| Superhydrophobic nanocomposite coatings based on different polysiloxane matrices designed for electrical insulators | 10.1016/j.porgcoat.2022.106867 | 2022 |
| Impact of phosphonium-based ionic liquids-modified carbon nanotube on the microwave absorbing properties and crystallization behavior of poly(vinylidene fluoride) composites | 10.1016/j.matchemphys.2022.125853 | 2022 |
| Dual Role of Magnetic Ionic Liquids as Curing Agents of Epoxy Resin and Microwave-Absorbing Additives | 10.1021/acsapm.1c01584 | 2022 |
| Epoxy resin/graphene nanoplatelets composites applied to galvanized steel with outstanding microwave absorber performance | 10.1515/polyeng-2021-0209 | 2022 |
| Broadband microwave absorbing materials for green electronics based on poly (lactic acid)/ |
10.1002/app.52510 | 2022 |
| Segregated structure of poly (vinylidene fluoride-co-hexafluoropropylene) composites loaded with polyaniline@carbon nanotube hybrids with enhanced microwave absorbing properties | 10.1016/j.synthmet.2022.117096 | 2022 |
| Influence of acidic and alkaline environmental anticorrosive performance of epoxy coatings based on polyaniline/carbon nanotube hybrids modified with ionic liquid | 10.1016/j.porgcoat.2022.107206 | 2022 |
| Tailoring Nylon 6/Acrylonitrile-Butadiene-Styrene Nanocomposites for Application against Electromagnetic Interference: Evaluation of the Mechanical, Thermal and Electrical Behavior, and the Electromagnetic Shielding Efficiency | 10.3390/ijms23169020 | 2022 |
| Adsorption behavior of tannic acid on polyethylenimine-modified montmorillonite with different morphologies | 10.1007/s00289-022-04550-2 | 2022 |
| Impact of magnetic ionic liquids as catalystson the curing process of epoxy/anhydride system: Mechanistic investigation and dynamic-mechanical analysis | 10.1002/app.52606 | 2022 |
| Ionic liquids as dispersing agents of graphene nanoplatelets in poly(methyl methacrylate) composites with microwave absorbing properties | 10.1002/app.49814 | 2021 |
| Poly(vinylidene fluoride-co-hexafluorpropylene)/polyaniline conductive blends: Effect of the mixing procedure on the electrical properties and electromagnetic interference shielding effectiveness | 10.1002/app.49705 | 2021 |
| Epoxidized cardanol-based prepolymer as promising biobased compatibilizing agent for PLA/PBAT blends | 10.1016/j.polymertesting.2020.106889 | 2021 |
| Toughened epoxy-liquid polybutadiene networks cured with anhydride with outstanding thermal and mechanical properties | 10.1002/app.50175 | 2021 |
| Effect of printing parameters on the electromagnetic shielding efficiency of ABS/carbonaceous-filler composites manufactured via filament fused fabrication | 10.1016/j.jmapro.2021.02.051 | 2021 |
| Polypropylene/poly(lactic acid)/carbon nanotube semi-biodegradable nanocomposites: The effect of sequential mixing approach and compatibilization on morphology, rheology and electrical conductivity | 10.1002/app.51195 | 2021 |
| Flexible dielectric |
10.1002/app.51186 | 2021 |
| Master batch approach for developing |
10.1002/app.51164 | 2021 |
| Effect of accelerated ageing procedures and flash rust inhibitors on the anti-corrosive performance of epoxy coatings: EIS and dynamic-mechanical analysis | 10.1016/j.porgcoat.2021.106387 | 2021 |
| Conducting Polymeric Composites Based on Intrinsically Conducting Polymers as Electromagnetic Interference Shielding/Microwave Absorbing Materials?A Review | 10.3390/jcs507017310.3390/jcs5070173 | 2021 |
| Epoxy-based coating containing polyaniline/zinc phosphate hybrid: Effect of hardener on anticorrosion performance | 10.1016/j.porgcoat.2021.106532 | 2021 |
| Rheological studies of SBS/EVA blends modified with bio-based cashew nut shell liquid | 10.1177/0095244321990407 | 2021 |
| Ballistic impact performance of composite laminates based on high-density polyethylene/montmorillonite nanocomposite and Aramide fiber | 10.1002/pc.26249 | 2021 |
| Fabrication and characterization of piezoresistive flexible pressure sensors based on poly(vinylidene fluoride)/thermoplastic polyurethane filled with carbon black¿polypyrrole | 10.1002/pc.26327 | 2021 |
| Reinforced epoxy-based laminates containing agro-industrial waste fiber from peach palm tree: effect of the matrix modification | 10.1007/s00289-021-03869-6 | 2021 |
| Polypropylene and hollow glass microspheres compatibilization via addition of compatibilizing agents | 10.1002/pc.26196 | 2021 |
| Hybrid carbonaceous materials for radar absorbing poly(vinylidene fluoride) composites with multilayered structures | 10.1002/pls2.10030 | 2021 |
| The effect of the noncovalent functionalization of CNT by ionic liquid on electrical conductivity and electromagnetic interference shielding effectiveness of semi¿biodegradable polypropylene/poly(lactic acid) composites | 10.1002/pc.25347 | 2020 |
| Phosphonium-based ionic liquid as crosslinker/dispersing agent for epoxy/carbon nanotube nanocomposites: electrical and dynamic mechanical properties | 10.1007/s10853-019-04147-7 | 2020 |
| Evaluation of Thermoplastic Vulcanizates in Radomes | 10.5028/jatm.etmq.11 | 2020 |
| Evaluation of Epoxy Resin Composites in Multilayer Structure for Stealth Technology | 10.5028/jatm.etmq.23 | 2020 |
| Epoxy/ferrite nanocomposites as microwave absorber materials: effect of multilayered structure | 10.1007/s10854-020-03863-0 | 2020 |
| An optical-magnetic Material as a toxic gas filter and sensing device | 10.1039/d0ra00537a | 2020 |
| Hybrid Composites Based on Thermoplastic Polyurethane With a Mixture of Carbon Nanotubes and Carbon Black Modified With Polypyrrole for Electromagnetic Shielding | 10.3389/fmats.2020.00174 | 2020 |
| Polyaniline/carbon nanotube hybrids modified with ionic liquids as anticorrosive additive in epoxy coatings | 10.1016/j.porgcoat.2020.105598 | 2020 |
| Exploring the Potential Use of Clean Scrap PVDF as Matrix for Conductive Composites Based on Graphite, Carbon Black and Hybrids: Electromagnetic Interference Shielding Effectiveness (EMI SE) | 10.1007/s10924-020-01753-4 | 2020 |
| Superhydrophobic nanostructured coatings for electrical insulators | 10.1002/pc.25554 | 2020 |
| Dynamic mechanical characterization of epoxy-based thermosetting materials loaded with lignin | 10.1007/s40430-020-02479-z | 2020 |
| Polyaniline co-doped with dodecyl benzene sulfonic acid and zwitterionic-based ionic liquids prepared by inverse emulsion polymerization | 10.1016/j.synthmet.2020.116435 | 2020 |
| Organophilic nano-alumina for superhydrophobic epoxy coatings | 10.1016/j.matchemphys.2020.123543 | 2020 |
| Attaining low percolation threshold in conductive polypropylene/nitrile rubber thermoplastic vulcanizates using carbon nanotube | 10.1002/app.49857 | 2020 |
| Rheological Properties of Epoxy/Polypyrrole Coating and its Behavior as EMI Material | 10.1002/vnl.21749 | 2020 |
| Rheological and thermal properties of EVA-organoclay systems using an environmentally friendly clay modifiera | 10.1590/0104-1428.03420 | 2020 |
| Sepiolite modified with phosphonium ionic liquids as anticorrosive pigment for epoxy coatings | 10.1016/j.clay.2020.105890 | 2020 |
| Rapid Prototyping of Efficient Electromagnetic Interference Shielding Polymer Composites via Fused Deposition Modeling | 10.3390/app9010037 | 2019 |
| Controlled delivery of dexamethasone and betamethasone from PLA electrospun fibers: A comparative study | 10.1016/j.eurpolymj.2019.05.001 | 2019 |
| Epoxy modified with urea-based ORMOSIL and isocyanate-functionalized polybutadiene: Viscoelastic and adhesion properties | 10.1016/j.compositesb.2019.03.058 | 2019 |
| Conductive heterogeneous blend composites of PP/PA12 filled with ionic liquids treated-CNT | 10.1016/j.polymertesting.2019.01.003 | 2019 |
| Electromagnetic interference shielding effectiveness of composites based on polyurethane derived from castor oil and nanostructured carbon fillers | 10.1002/pc.24501 | 2019 |
| Conducting Materials Based on Epoxy/Graphene Nanoplatelet Composites With Microwave Absorbing Properties: Effect of the Processing Conditions and Ionic Liquid | 10.3389/fmats.2019.00156 | 2019 |
| Influence of Protonic Ionic Liquid on the Dispersion of Carbon Nanotube in PLA/EVA Blends and Blend Compatibilization | 10.3389/fmats.2019.00234 | 2019 |
| Double Percolation of Melt-Mixed PS/PBAT Blends Loaded With Carbon Nanotube: Effect of Molding Temperature and the Non-covalent Functionalization of the Filler by Ionic Liquid | 10.3389/fmats.2019.00191 | 2019 |
| THERMOPLASTIC VULCANIZATES BASED ON DYNAMICALLY VULCANIZED POLYPROPYLENE/CARBOXYLATED NITRILE RUBBER BLENDS | 10.5254/rct.19.81480 | 2019 |
| Evaluation of silane effect as a coupling agent for metakaolin | 10.1177/0095244319877667 | 2019 |
| Epoxy/imidazolium-based ionic liquid systems: The effect of the hardener on the curing behavior, thermal stability, and microwave absorbing properties | 10.1002/app.48326 | 2019 |
| New all solid-state polymer electrolyte based on epoxy resin and ionic liquid for high temperature applications | 10.1002/app.45838 | 2018 |
| Hybrid composites of ABS with carbonaceous fillers for electromagnetic shielding applications | 10.1002/app.46546 | 2018 |
| Ionic liquid: A smart approach for developing conducting polymer composites | 10.1016/j.molliq.2018.04.049 | 2018 |
| Conducting melt blending of polystyrene and EVA copolymer with carbon nanotube assisted by phosphonium-based ionic liquid | 10.1002/app.45564 | 2018 |
| Electromagnetic interference shielding effectiveness of ABS carbon-based composites manufactured via fused deposition modelling | 10.1016/j.mtcomm.2018.02.034 | 2018 |
| Electromagnetic interference shielding effectiveness and microwave absorption properties of thermoplastic polyurethane/montmorillonite-polypyrrole nanocomposites | 10.1002/pat.4249 | 2018 |
| Nanostructured epoxy-rubber network modified with mwcnt and ionic liquid: Electrical, dynamic-mechanical, and adhesion properties | 10.1002/pc.24852 | 2018 |
| Comparisons of complex modulus provided by different DMA | 10.1016/j.polymertesting.2018.10.034 | 2018 |
| Epoxy-MWCNT composites prepared from master batch and powder dilution: Effect of ionic liquid on dispersion and multifunctional properties | 10.1002/pen.24759 | 2018 |
| DGEBA-Based Epoxy Resin as Compatibilizer for Biodegradable Poly (lactic acid)/Poly(butylene adipate-co-terephthalate) Blends | 10.1002/masy.201800133 | 2018 |
| A comparative study of aligned and random electrospun mats of thermoplastic polyurethane and conductive additives based on polypyrrole | 10.1016/j.polymertesting.2018.08.002 | 2018 |
| The Effect of Ionic Liquid on the Development of Polyaniline/Natural Fibers and Biodegradable Conductive Composites Based on Poly(Butylene Adipate-co-Terephthalate) | 10.1002/masy.201800101 | 2018 |
| Dielectric Behavior of SBS/Polyaniline Thermally Processable Blends | 10.23939/chcht12.04.441 | 2018 |
| Conductive Composites Based on Polyurethane and Nanostructured Conductive Filler of Montmorillonite/Polypyrrole for Electromagnetic Shielding Applications | 10.1590/1980-5373-mr-2018-0014 | 2018 |
| Effects of Rotor Speed on Peroxide/Bismaleimide Cured Polypropylene/Nitrile Rubber Thermoplastic Vulcanizates (TPVs) | 10.1590/1980-5373-mr-2018-0202 | 2018 |
| Magnetic Sio2-Fe3O4 Nanocomposites as Carriers of Ibuprofen for Controlled Release Applications | 10.1515/rams-2018-0023 | 2018 |
| Electrically conductive composites of polyurethane derived from castor oil with polypyrrole-coated peach palm fibers | 10.1002/pc.23790 | 2017 |
| Dual functions of ILs in the core-shell particle reinforced epoxy networks: Curing agent vs dispersion aids | 10.1016/j.compscitech.2016.12.021 | 2017 |
| Toughening of Epoxy/Ionic Liquid Networks with Thermoplastics Based on Poly(2,6-dimethyl-1,4-phenylene ether) (PPE) | 10.1021/acssuschemeng.6b02479 | 2017 |
| Modification of anionic and cationic clays by zwitterionic imidazolium ionic liquid and their effect on the epoxy-based nanocomposites | 10.1016/j.clay.2016.10.016 | 2017 |
| Epoxy-Fiber of Peach Palm Trees Composites: The Effect of Composition and Fiber Modification on Mechanical and Dynamic Mechanical Properties | 10.1007/s10924-016-0841-0 | 2017 |
| Phosphonium-based ionic liquid as dispersing agent for MWCNT in melt-mixing polystyrene blends: Rheology, electrical properties and EMI shielding effectiveness | 10.1016/j.matchemphys.2016.12.073 | 2017 |
| Effects of graphene functionalization on the long-term behavior of epoxy/graphene composites evaluated by dynamic mechanical analysis | 10.1002/app.44816 | 2017 |
| DBSA-CTAB mixture as the surfactant system for the one step inverse emulsion polymerization of aniline: Characterization and blend with epoxy resin | 10.1016/j.synthmet.2017.02.014 | 2017 |
| HYBRID NANOCOMPOSITES OF THERMOPLASTIC ELASTOMER AND CARBON NANOADDITIVES FOR ELECTROMAGNETIC SHIELDING | 10.1016/j.eurpolymj.2017.01.023 | 2017 |
| A general approach for viscoelastic model validation applied on the analyses of epoxy resin modified by end-functionalized liquid polybutadiene | 10.1007/s40430-016-0565-z | 2017 |
| Effect of sonication and clay content on the properties of unsaturated polyester/montmorillonite nanocomposites | 10.1177/0021998316644847 | 2017 |
| Development and In Vitro Assessment of Nanoemulsion for Delivery of Ketoconazole Against Candida albicans | 10.1166/jnn.2017.13445 | 2017 |
| Fully biodegradable composites based on poly(butylene adipate- co -terephthalate)/peach palm trees fiber | 10.1016/j.compositesb.2017.07.088 | 2017 |
| Ionic liquid-based organically modified silica for the development of new electrorheological fluids | 10.1016/j.colsurfa.2017.05.091 | 2017 |
| PAMAM dendrimer hydrogel film-biocompatible material to an efficient dermal delivery of drugs | 10.1007/s11051-017-3965-9 | 2017 |
| Estudo das propriedades reológicas, mecânicas e de blindagem eletromagnética de misturas elastoméricas envolvendo borracha nitrílica (NBR) e borracha nitrílica carboxilada (XNBR) | 10.1590/0104-1428.1973 | 2017 |
| Silica-polyaniline hybrid materials prepared by inverse emulsion polymerization for epoxy-based anticorrosive coating | 10.1002/app.45505 | 2017 |
| Characterization of crystalline structure and free volume of polyamide 6/nitrile rubber elastomer thermoplastic vulcanizates: Effect of the processing additives | 10.1002/app.45576 | 2017 |
| Bronsted acidic ionic liquids: New transesterification agents for the compatibilization of Polylactide/Ethylene-co-vinyl acetate blends | 10.1016/j.eurpolymj.2017.10.003 | 2017 |
| Development of Sustainable Thermosets from Cardanol-based Epoxy Prepolymer and Ionic Liquids | 10.1021/acssuschemeng.7b02292 | 2017 |
| The influence of chemicals on asphaltenes precipitation: a comparison between atomic force microscopy and near infrared techniques | 10.18273/revfue.v15n1-2017001 | 2017 |
| Quantification of overall migration levels from poly (vinyl chloride) films: Effects of gamma and electron beam radiation | 10.18067/jbfs.v4i2.135 | 2017 |
| Processing and characterization of conductive composites based on poly(styrene-b-ethylene-ran-butylene-b-styrene) (SEBS) and carbon additives: A comparative study of expanded graphite and carbon black | 10.1016/j.compositesb.2015.09.001 | 2016 |
| Effect of double percolation on the electrical properties and electromagnetic interference shielding effectiveness of carbon-black-loaded polystyrene/ethylene vinyl acetate copolymer blends | 10.1002/app.43013 | 2016 |
| Influence of two different molecular weight epoxy resins on the glass transition of composites manufactured with expanded graphite | 10.1177/0021998315596593 | 2016 |
| Organoclay-epoxy nanocomposites modified with polyacrylates: The effect of the clay mineral dispersion method | 10.1016/j.clay.2016.02.003 | 2016 |
| Electromagnetic interference shielding and electrical properties of nanocomposites based on poly (styrene-b-ethylene-ran-butylene-b-styrene) and carbon nanotubes | 10.1016/j.eurpolymj.2016.02.020 | 2016 |
| Ionic liquids: A New Route for the Design of Epoxy Networks | 10.1021/acssuschemeng.5b00953 | 2016 |
| Conducting epoxy networks modified with non-covalently functionalized multi-walled carbon nanotube with imidazolium-based ionic liquid | 10.1002/app.43976 | 2016 |
| Ionic liquid - Assisted emulsion polymerization of aniline in organic medium | 10.1016/j.matchemphys.2016.05.028 | 2016 |
| Dual-role of phosphonium - Based ionic liquid in epoxy/MWCNT systems: Electric, rheological behavior and electromagnetic interference shielding effectiveness | 10.1016/j.eurpolymj.2016.09.016 | 2016 |
| Organically modified silica (ORMOSIL) bearing imidazolium - Based ionic liquid prepared by hydrolysis/co-condensation of silane precursors: Synthesis, characterization and use in epoxy networks | 10.1016/j.eurpolymj.2016.08.030 | 2016 |
| Development of Electrospun Polyaniline/poly(lactic acid) Nanofiber-Based Sensors | 10.1166/sl.2016.3740 | 2016 |
| Rheological behavior of acrylic paint blends based on polyaniline | 10.1590/0104-1428.2178 | 2016 |
| Anisotropic reinforcement of epoxy-based nanocomposites with aligned magnetite-sepiolite hybrid nanofiller | 10.1016/j.compscitech.2015.03.008 | 2015 |
| Electrically Conductive Polyaniline-Coated Electrospun Poly(Vinylidene Fluoride) Mats | 10.3389/fmats.2015.00014 | 2015 |
| Production of montmorillonite/polypyrrole nanocomposites through in situ oxidative polymerization of pyrrole: Effect of anionic and cationic surfactants on structure and properties | 10.1016/j.clay.2014.11.026 | 2015 |
| Preparation of Epoxy/Jeffamine Networks Modified With Phosphonium Based Ionic Liquids | 10.1002/mame.201400293 | 2015 |
| Long-term behavior of epoxy/graphene-based composites determined by dynamic mechanical analysis | 10.1007/s10853-015-9193-8 | 2015 |
| Zirconium-methacrylate oxoclusters as new hybrid materials for the modification of epoxy systems | 2015 | |
| Poly(vinylidene fluoride-co-hexafluoropropylene)/polyaniline blends assisted by phosphonium - Based ionic liquid: Dielectric properties and β-phase formation | 10.1016/j.eurpolymj.2015.10.003 | 2015 |
| Novel electrically conductive polyurethane/montmorillonite-polypyrrole nanocomposites | 2015 | |
| Avaliação das condições de envelhecimento do sistema catalítico versatato de neodímio/hidreto de di-isobutilalumínio/cloreto de t-butila na polimerização de 1,3-butadieno | 10.4322/polimeros.2014.016 | 2014 |
| New Epoxy/Jeffamine networks modified with ionic liquids | 10.1002/app.39834 | 2014 |
| Self-supported bacterial cellulose polyaniline conducting membrane as electromagnetic interference shielding material: effect of the oxidizing agent | 10.1007/s10570-014-0191-9 | 2014 |
| Ionic liquids-lignin combination: an innovative way to improve mechanical behaviour and water vapour permeability of eco-designed biodegradable polymer blends | 10.1039/c4ra11919c | 2014 |
| Ionic liquids as reactive additives for the preparation and modification of epoxy networks | 10.1002/pola.27420 | 2014 |
| Effect of the dispersive method in the preparation of the polyurethane/hydrotalcite nanocomposites by in situ polymerization | 10.1016/j.clay.2014.07.027 | 2014 |
| Silylated montmorillonite as nanofillers for plasticized PVC nanocomposites: Effect of the plasticizer | 10.1016/j.clay.2014.06.017 | 2014 |
| Structuration of ionic liquids in a poly(butylene-adipate-co-terephthalate) matrix: its influence on the water vapour permeability and mechanical properties | 10.1039/C4GC00969J | 2014 |
| Obtenção de nanocompósitos condutores de montmorilonita/polipirrol: Efeito da incorporação do surfactante na estrutura e propriedades | 10.4322/polimeros.2014.051 | 2014 |
| Avaliação das razões molares Cl:Nd e Al:Nd na polimerização de 1,3-butadieno com o sistema catalítico versatato de neodímio/hidreto de di-isobutilalumínio/cloreto de t-butila | 10.4322/polimeros.2014.018 | 2014 |
| Silica Prepared in the Presence of Alkylphosphonium - Based Ionic Liquids and its Performance in Electro-Rheological Fluids | 10.1039/c4ra06666a | 2014 |
| Nanostructured thermosets from ionic liquid building block-epoxy prepolymer mixtures | 10.1039/c4ra03643c | 2014 |
| Supercritical CO2-organosilane mixtures for modification of silica: Applications to epoxy prepolymer matrix | 10.1016/j.cej.2013.12.013 | 2014 |
| Influence of compatibilizer content on PA/NBR blends properties: Unusual characterization and evaluation methods | 10.1002/app.37792 | 2013 |
| New Epoxy Systems based on Ionic Liquid | 10.1016/j.polymer.2013.02.021 | 2013 |
| Influence of different concentrations of N-phenylaminopropyl - POSS on the thermodynamic fragility of the cured epoxy resin | 10.1016/j.polymer.2013.03.022 | 2013 |
| Flexible magnetic membranes based on bacterial cellulose and its evaluation as electromagnetic interference shielding material | 10.1016/j.msec.2013.05.035 | 2013 |
| Influence of the Polyhedral Oligomeric Silsesquioxane n-Phenylaminopropyl - POSS in the Thermal Stability and the Glass Transition Temperature of Epoxy Resin | 10.4322/polimeros.2013.039 | 2013 |
| Compatibilization efficiency of carboxylated nitrile rubber and epoxy pre-polymer in nitrile/acrylic rubber blends. | 10.1590/S0104-14282013005000024 | 2013 |
| Electrorheological and dielectric behavior of new ionic liquid/silica systems | 10.1016/j.jcis.2013.05.013 | 2013 |
| Assessing the nanoscale structure of clay epoxy nanocomposites by tuning the physicochemical and processing conditions | 10.1016/j.clay.2013.08.037 | 2013 |
| Studies on thermal-oxidative degradation behaviours of raw natural rubber: PRI and thermogravimetry analysis | 10.1179/1743289811Y.0000000046 | 2013 |
| Electrical, rheological and electromagnetic interference shielding properties of thermoplastic polyurethane/carbon nanotube composites | 10.1002/pi.4446 | 2013 |
| Degradation of non-vulcanized natural rubber renewable resource for fine chemicals used in polymer synthesis | 10.4322/polimeros.2013.070 | 2013 |
| THERMAL PROTECTION OF POLYAMIDE 6/ACRYLONITRILE-BUTADIENE RUBBER THERMOPLASTIC-VULCANIZATES: INFLUENCE OF TYPE AND CONTENT ON BLEND PROPERTIES | 10.5254/rct.13.87976 | 2013 |
| Hybrid polyaniline-coated sepiolite nanofibers for electrorheological fluid applications | 10.1016/j.synthmet.2013.09.037 | 2013 |
| Investigation on microstructural behavior of styroflex/polyniline blends by WAXS | 10.1002/app.35652 | 2012 |
| Influence of different percentages of N-phenylaminopropyl-poss on the degradation kinetic of epoxy resin | 10.1002/pc.22271 | 2012 |
| EMI shielding effectiveness and dielectrical properties of SBS/PAni.DBSA blends: Effect of blend preparation | 10.1002/app.36338 | 2012 |
| Hopping conduction on carbon black/styreneâ¿¿butadieneâ¿¿styrene composites | 10.1007/s10853-011-5864-2 | 2012 |
| Electrically conducting nanocomposites: preparation and properties of polyaniline (PAni)-coated bacterial cellulose nanofibers (BC) | 10.1007/s10570-012-9754-9 | 2012 |
| Microwave dielectric properties and EMI shielding effectiveness of poly(styrene-b-styrene- butadiene-styrene) copolymer filled with PAni.Dodecylbenzenesulfonic acid and carbon black | 10.1002/pen.23090 | 2012 |
| Preparation of epoxy/MCDEA networks modified with ionic liquids | 10.1016/j.polymer.2011.11.043 | 2012 |
| Relaxation phenomena in the glass transition of epoxy/N-phenylaminopropyl ¿ POSS nanocomposites | 10.1016/j.polymer.2012.10.018 | 2012 |
| Facile method for synthesis of polyaniline/silica hybrid composites by simultaneous sol¿gel process and ¿in situ¿ polymerization of aniline | 10.1007/s10971-012-2796-5 | 2012 |
| A facile and inexpensive method for the preparation of conducting polyaniline¿clay composite nanofibers | 10.1016/j.synthmet.2012.10.015 | 2012 |
| New electrorheological fluid obtained from mercaptosilsesquioxane-modified silicate suspensions | 10.1016/j.msec.2012.08.019 | 2012 |
| Study of microwave absorbing properties of polyaniline/STF conducting composites prepared by in situ polymerization | 10.1002/masy.200900106 | 2011 |
| Dynamically vulcanized polypropylene/styrene-butadiene rubber blends: The effect of a peroxide/bismaleimide curing system and composition | 10.1002/app.33123 | 2011 |
| Nitrile rubber/organomontmorillonite nanocomposites produced by solution and melt compounding: Effect of the polarity of the quaternary ammonium intercalants | 10.1002/app.32649 | 2011 |
| Characterization of nanostructured epoxy networks modified with isocyanate-terminated liquid polybutadiene | 10.1016/j.jcis.2011.03.030 | 2011 |
| Structure and properties of conducting bacterial cellulose-polyaniline nanocomposites | 10.1007/s10570-011-9565-4 | 2011 |
| Synthesis and Characterization of Epoxy/MCDEA Networks Modified with Imidazolium-Based Ionic Liquids | 10.1002/mame.201000388 | 2011 |
| Nanostructure and dynamic mechanical properties of silane-functionalized montmorillonite/epoxy nanocomposites | 10.1016/j.clay.2011.08.002 | 2011 |
| The effect of addition of acrylic acid and thioglycolic acid on the nanostructure and thermal stability of PMMA¿montmorillonite nanocomposites | 10.1016/j.clay.2009.12.010 | 2010 |
| SAXS Characterization of New Nanocomposites Based on Epoxy Resin/Siloxane/MMA/Acrylic Acid Hybrid Materials | 10.1002/mame.200900286 | 2010 |
| Microstructural behaviors of polyaniline/carbon black composites by SAXS | 10.1002/app.30904 | 2010 |
| Synthesis of conductive adhesives based on epoxy resin and polyaniline.DBSA using the in situ polymerization and physical mixing procedures | 10.1016/j.synthmet.2010.07.021 | 2010 |
| Structural, Electrical, Mechanical, and Thermal Properties of Electrospun Poly(lactic acid)/Polyaniline Blend Fibers | 10.1002/mame.201000019 | 2010 |
| Influence of aliphatic amine epoxy hardener on the adhesive properties of blends of mono-carboxyl-terminated poly(2-ethylhexyl acrylate-co-methyl methacrylate) with epoxy resin | 10.1002/app.31720 | 2010 |
| The effect of dynamic vulcanization on the mechanical, dynamic mechanical and fatigue properties of TPV based on polypropylene and ground tire rubber | 10.1016/j.polymertesting.2010.07.008 | 2010 |
| Creep Behavior of PA6/NBR TPVs | 10.1080/1023666X.2010.493269 | 2010 |
| Nitrile rubber - based nanocomposites prepared by melt mixing: effect of the mixing parameters on mechanical, dynamic-mechanical and creep behavior | 10.1590/S0104-14282010005000055 | 2010 |
| The dynamic-mechanical behavior of epoxy matrix composites reinforced with ramie fibers | 2010 | |
| Biobased chain extended polyurethane and its composites with silk fiber | 10.1002/pen.21604 | 2010 |
| Macromol. Mater. Eng. 7/2010 | 10.1002/mame.201090012 | 2010 |
| Development of conducting polyaniline/ poly(lactic acid) nanofibers by electrospinning | 10.1002/app.29447 | 2009 |
| Synthesis of polyaniline/ camphor sulfonic acid in formic acid medium and their blends with polyamide-6 by in situ polymerizatio | 10.1016/j.synthmet.2009.04.006 | 2009 |
| Acrylic rubber/nitrilic rubber blends: The effect of curatives on the mechanical, morphological and dynamic mechanical properties | 10.1002/app.30099 | 2009 |
| Relationships between nanostructure and dynamic-mechanical properties of epoxy network containing PMMA-modified silsesquioxane | 10.3144/expresspolymlett.2009.43 | 2009 |
| Effect of sepiolite on the physical properties and swelling behavior of rifampicin-loaded nanocomposite hydrogels | 10.3144/expresspolymlett.2009.64 | 2009 |
| Effect of alkylaluminum structure on Ziegler-Natta catalyst systems based on neodymium for producing high-cis polybutadiene | 10.1007/s00289-008-1006-7 | 2009 |
| PA6/NBR blends: improvement of processability and mechanical properties | 2009 | |
| Natural Brazilian Amazonic (Curauá) Fibers Modified with Polyaniline Nanoparticles | 10.1002/mame.200900033 | 2009 |
| A Sensor for Acid Concentration Based on Cellulose Paper Sheets Modified with Polyaniline Nanoparticles | 10.1002/mame.200900111 | 2009 |
| Development of Thermoplastic Elastomers Vulcanized (TPV) with Polypropylene Waste Tire. I - Factorial Design Experiments | 2009 | |
| Creep Behavior of Polyamide 6/Nitrylic Rubber TPV's Blends | 2009 | |
| Electrospinning of Polyaniline/Poly(Lactic Acid) Ultrathin Fibers: Process and Statistical Modeling using a Non-Gaussian Approach | 10.1002/mats.200900053 | 2009 |
| Macromol. Theory Simul. 9/2009 | 10.1002/mats.200990016 | 2009 |
| Effect of the molecular architecture of graft copolymers on the phase morphology and tensile properties of PS/EVA blends | 10.1002/app.26868 | 2008 |
| Thoughening of Epoxy Resin Using Isocyanate-Terminated Polyether | 10.1002/app.26991 | 2008 |
| Polyester containing isocyanate groups-Modified epoxy resin: Rheological, dynamic-mechanical, and impact properties | 10.1002/pen.21035 | 2008 |
| Influence of reaction media on pressure sensitivity of polyanilines doped with DBSA | 10.1002/app.27290 | 2008 |
| Blends of styrene-butadiene-styrene tri-block copolymer/polyaniline - Characterization by SAXS | 10.1016/j.msea.2007.05.099 | 2008 |
| Preparation and characterization of high-impact polystyrene using different types of polybutadiene | 10.1002/app.27656 | 2008 |
| Modificação de polímeros termorrígidos por separação de fase induzida por reação química. Sistema éter diglicidílico do bisfenol A e trietilenotetramina com copolímeros acrílicos | 10.1590/S0104-14282008000100008 | 2008 |
| New polyaniline/polycardanol conductive blends characterized by FTIR, NIR, and XPS | 10.1002/pen.21047 | 2008 |
| Dynamically vulcanized polypropylene/nitrile rubber blends: The effect of peroxide/bis-maleimide curing system and different compatibilizing systems | 10.1002/app.28946 | 2008 |
| Relationships between nanostructure and thermomechanical properties in poly(vinyl alcohol)/montmorillonite nanocomposite with an entrapped polyelectrolyte | 10.1002/polb.21586 | 2008 |
| A novel thermoplastic elastomer based on dynamically vulcanized polypropylene/acrylic rubber blends | 10.3144/expresspolymlett.2008.72 | 2008 |
| The effect of functionalized EPDM on the kinetics of sulfur vulcanization of natural rubber/EPDM blends | 10.1002/mame.200600332 | 2007 |
| Poly(vinyl alcohol)/clay- based nanocomposite hydrogels: swelling behavior and characterization | 10.1002/mame.200700004 | 2007 |
| Poly(vinyl alcohol)/sulfonated polyester hydrogels produced by freezing and thawing technique: preparation and characterization | 2007 | |
| Compatibilization of natural rubber/EPDM blends by anhydride- and mercapto-functionalized copolymers | 10.1080/00222340701386569 | 2007 |
| SBS/Pani.DBSA mixture plasticized with DOP and NCLS - effect of the plasticizers on the probability density of volume resistivity measurements | 10.1016/j.eurpolymj.2007.02.037 | 2007 |
| Effect of blend preparation on electrical, dielectric and dynamical-mechanical properties of conducting polymer blends: SBS triblock copolymer/polyaniline | 10.1002/mame.200600405 | 2007 |
| Effect of water absorption on the thermal-mechanical properties of HTPB modified DGEBA-based epoxy systems | 10.1016/j.polymertesting.2006.10.009 | 2007 |
| Combined analytical techniques for the determination of the amine hydrogen equivalent weight in aliphatic amine epoxide hardeners | 10.1016/j.polymertesting.2006.09.001 | 2007 |
| The characterization of PP/NBR blends by positron annihilation lifetime spectroscopy (PALS): The effect of composition and dynamic vulcanization | 10.1016/j.polymertesting.2006.08.009 | 2007 |
| Kinetic analysis of thermal degradation of NR/EPDM blends: effect of the reactive compatibilization | 10.1002/app.25418 | 2007 |
| Preparation of the semi-conductive thermoplastic elastomer vulcanizate based on EVA and NBR blends with polyaniline | 10.1016/j.polymertesting.2007.04.008 | 2007 |
| Influência do envelhecimento de catalisadores Ziegler-Natta a base de Neodímio sobre a polimerização de 1,3-butadieno | 10.1590/S0104-14282007000100014 | 2007 |
| Evaluation of electrical properies of SBS/PAni blends plasticized with DOP and CNSL using an empirical statistical model | 10.1016/j.polymertesting.2007.03.004 | 2007 |
| Mechanical properties of epoxy networks based on DGEBA and aliphatic amines | 10.1002/app.24895 | 2007 |
| Effect of preparation method on nanoscopic structure of conductive SBS/PANI blends: Study using small-angle X-ray scattering | 10.1002/polb.21305 | 2007 |
| Rheological, mechanical, and morphological studies of epoxy/poly(methyl methacrylate) semi-interpenetrating polymer networks | 10.1002/app.25572 | 2007 |
| Microstructural evaluation of poly(vynil alcohol)-based hydrogels obtained by freezing-thawing technique: thermal analysis and positron annihilation | 10.1002/app.26119 | 2007 |
| Variation of long periodicity in blends of styrene butadiene, styrene copolymer/polyaniline using small angle X-ray scattering data | 10.1007/s12043-007-0144-z | 2007 |
| Microstructure and free volume evaluation of poly(vinyl alcohol) nanocomposite hydrogels | 10.1016/j.eurpolymj.2007.10.001 | 2007 |
| Toughening of epoxy resin by methyl methacrylate - 2-ethylhexyl acrylate copolymers: Effect of the copolymer composition | 10.1002/mame.200700227 | 2007 |
| A novel material based on polyaniline doped with [Cs][In(dmit)2], cesium [bis(1,3-dithiole-2-thione-4,5-dithiolato)indium (III)] | 10.1016/j.synthmet.2007.11.004 | 2007 |
| Variation of the adhesive properties of an epoxy resin modified by end-functionalized liquid polybutadiene as a function of temperature and water absorption | 10.1080/00218460701749495 | 2007 |
| Comparative study of different types of polybutadiene onthe toughening of polystyrene | 10.1590/S0104-14282007000400011 | 2007 |
| The most important butadiene based elastomers employed in the automotive industry | 10.1590/S0104-14282007000400009 | 2007 |
| Reactive compatibilization of polystyrene/poly (ethylene-co-vinyl acetate) (EVA) blends | 10.1002/app.21856 | 2006 |
| Performance evaluation of high-cis 1,4-polybutadiene | 10.1002/app.22386 | 2006 |
| Dielectric behavior of polyaniline synthesized by different techniques | 10.1016/j.eurpolymj.2005.08.013 | 2006 |
| The in situ polymerization of aniline in nitrile rubber | 10.1016/j.synthmet.2005.09.045 | 2006 |
| Mechanical and morphological properties of polypropylene/nitrile butadiene rubber compatibilized vulcanizates | 2006 | |
| Conducting elastomer blends based on nitrile rubber and Pani.DBSA | 2006 | |
| Conductive epoxy/amine system containing polyaniline doped with dodecylbenzenesulfonic acid | 10.1002/app.23238 | 2006 |
| Blends of styrene butadiene styrene TRI block copolymer/polyaniline - characterization by WAXS | 10.1016/j.polymer.2006.01.033 | 2006 |
| Influence of temperature ageing of Ziegler-Natta catalyst on 1,3-butadiene polymerization | 2006 | |
| SBS/Polyaniline or carbon black system: Finding the optimum process and molding temperature through experimental design | 10.1002/mame.200500406 | 2006 |
| Methodology for determination of Pani.DBSA content in conductive blends using UV-Vis spectrometry | 10.1016/j.polymertesting.2006.01.014 | 2006 |
| Characterization of sulfonated poly(styrene-divinylbenzene) and poly(divinylbenzene) and its application as catalysts in esterification reaction | 10.1002/app.24046 | 2006 |
| Influence of curing agent and compatibilizer on the physicomechanical properties of polypropylene/ nitrile butadiene rubber blends investigated by positron annhihilation lifetime technique | 10.1002/app.24497 | 2006 |
| In Situ polymerization of aniline in the presence of carbon black | 10.1002/app.24280 | 2006 |
| Influence of plasticizers (DOP and CNSL) on mechanical and electrical properties of SBS/polyaniline blends | 10.1016/j.polymer.2006.08.026 | 2006 |
| Composite materials based on modified epoxy resin and carbon fiber | 2006 | |
| Efeito de EPDM modificado com grupos mercapto ou tioacetato na cinética de vulcanização de misturas NR/EPDM | 2006 | |
| Determinação da distribuição de funcionalidade de HTPB e verificação de sua influência no comportamento mecânico de poliuretano utilizado em motor-foguete | 2006 | |
| Efeito de doadores de Elétrons na polimerização de butadieno com catalisadores à base de neodímio | 2005 | |
| Utilization of maleic anhydride ground EVA waste in NBR vulcanizates | 10.5254/1.3547870 | 2005 |
| Caracterização do sistema éter diglicidílico do Bisfenol A/ Poliaminas alifáticas | 2005 | |
| Aplicação de resinas sulfônicas como catalisadores em reações de transesterificação de óleos vegetais | 2005 | |
| Effect of electron donors on 1,3-butadiene polymerization by a Ziegler-Natta catalyst based on neodymium | 10.1002/app.22391 | 2005 |
| A methodology for studying the dependence of electrical resistivity with pressure in conducting composites | 10.1016/j.polymertesting.2005.08.001 | 2005 |
| Compatibilization of NBR/EPDM blends by mercapto-modified EVA copolymer | 10.1002/app.13254 | 2004 |
| Reactive compatibilization of NBR/EPDM blends by the combination of mercapto and oxazoline groups | 10.1002/macp.200300028 | 2004 |
| Solvent effect in cis-1,4-polymerization of 1,3-butadiene by a catalyst based on neodymium | 10.1016/j.eurpolymj.2003.10.023 | 2004 |
| Polimerização 1,4-cis de butadieno com sistemas catalíticos Ziegler-Natta a base de neodímio | 2004 | |
| The reactive compatibilization of NBR/EVA blends with oxazoline -modified nitrile rubber | 10.1016/j.eurpolymj.2004.04.006 | 2004 |
| Adhesive properties of epoxy resin modified by end-functionalized liquid polybutadiene | 10.1002/app.20739 | 2004 |
| Adhesivos epoxidicos modificados com polibutadieno liquido funcionalizado | 2004 | |
| Influência das Características estruturais sobre a processabilidade do polibutadieno alto cis | 2004 | |
| Thermally stable conducting composites based on a carbon black-filled polyoxadiazole matrix | 10.1002/app.20601 | 2004 |
| Morphology and dielectric properties of an epoxy network modified by end-functionalized liquid polybutadiene | 10.1002/polb.20254 | 2004 |
| Caracterização das propriedades reológicas e dinâmicas de composições de borracha natural com resíduo de EVA | 2004 | |
| Determination of the epoxide equivalent weight of epoxy resin based on diglycidyl ether of bisphenol A(DGEBA) by proton nuclear magnetic resonance | 10.1016/S0142-9418(02)00048-X | 2003 |
| Avaliação da resistência à corrosão de compósitos ferromagnéticos com policloropreno ao ensaio de névoa salina | 2003 | |
| Efeito da compatibilização da mistura NBR/EVA sobre a morfologia de fase co-contínua | 2003 | |
| Cocontinuous morphologies in polystyrene/ethylene-vinyl acetate blends: The influence of the processing temperature | 10.1002/app.12073 | 2003 |
| Avaliação da incorporação de resíduo de poli(etileno-co-acetato de vinila) em borracha nitrílica | 2003 | |
| Utilização de NBR modificada com grupos 2-oxazolina em misturas de NBR/EVA | 2003 | |
| Reactive compatibilization of nitrile rubber/EPDM blends | 2003 | |
| Synthesis and properties of epoxy resin modified with epoxy-terminated liquid polybutadiene | 10.1016/S0032-3861(03)00537-8 | 2003 |
| Effect of mercapto-modified EVA on the curing parameters and mechanical and dynamical properties of vulcanized NBR/EVA blends | 10.1002/app.12887 | 2003 |
| Effect of anhydride-modified EPDM and EVA copolymer on the compatibilization of NBR/EPDM blends | 10.1002/app.12891 | 2003 |
| Electric, dielectric and dynamic mechanical behavior of carbon black/styrene-butadiene-styrene composites | 10.1002/polb.10627 | 2003 |
| The effect of mercapto- and thioacetate-modified EPDM on the curing parameters and mechanical properties of natural rubber/EPDM blends | 10.1016/S0014-3057(03)00163-0 | 2003 |
| Separação de fases induzida por meio de reação química no sistema eter diglicidílico do Bisfenol A e piperidina com poli(metacrilato de metila) | 2003 | |
| Modification of epoxy resin by isocyanate-terminated polybutadiene | 10.1002/app.10079 | 2002 |
| Mercapto-modified copolymers in elastomer blends. IV. The compatibilization of natural rubber/EPDM blends | 10.1002/app.10283 | 2002 |
| The effect of mercapto-modified EVA on rheological and dynamic mechanical properties of NBR/EVA | 10.1002/app.10497 | 2002 |
| Grafting of poly(methyl methacrylate from poly(ethylene-co-vinyl acetate) copolymer using atom transfer radical polymerization | 10.1016/S0014-3057(01)00225-7 | 2002 |
| Influência do sistema de vulcanização nas propriedades da mistura NBR/EPDM | 2002 | |
| Study of utilization of ground EVA waste as filler in NBR vulcanizates | 2002 | |
| The Reactive Compatibilization of EPDM-based Elastomer blends | 2002 | |
| Solution-cast blends of polyaniline-DBSA with EVA copolymers | 10.1016/S0379-6779(02)00115-7 | 2002 |
| Performance of radar absorbing materials by waveguide measurements for X- and Ku-band frequencies | 10.1016/S0014-3057(02)00118-0 | 2002 |
| The effect of mercapto modified EVA on curing parameters, mechanical properties and thermal properties of vulcanized SBR/EVA blends | 10.1002/app.10951 | 2002 |
| Addition effect of barium and strontium titanate on the reflectivity of ferri and ferromagnetic composites | 10.1002/mop.10168 | 2002 |
| Dynamic mechanical and dielectric relaxations of SBS bloco copolymer:polyaniline blends prepared by mechanical mixing | 10.1016/S0032-3861(02)00613-4 | 2002 |
| Compatibilization of elastomer-based blends | 2002 | |
| Poly(ethylene-co-vinyl acetate)-g-PMMA as a modifier of epoxy resins | 10.1002/pi.1020 | 2002 |
| Morfologia Cocontínua na mistura poliestireno/EVA | 2002 | |
| Mistura PANI.DBSA/SBS obtida por polimerização in-situ: propriedades elétricas, dielétricas e dinamico-mecânicas | 2002 | |
| Obtenção "in situ" de misturas condutoras da eletricidade a base de polianilina | 2002 | |
| Compósitos condutores de polianilina e policloropreno | 2002 | |
| Uso de EVA modificado com grupos mercaptana na compatibilização de misturas NBR/EPDM | 2002 | |
| Mercapto-modified copolymers in polymer blends.II. The compatibilization of NBR/EVA | 10.1002/1097-4628(20010110)79:2<193::AID-APP10>3.0.CO;2-8 | 2001 |
| X-ray photoelectron spectroscopy and electrical conductivity of polyaniline doped with DBSA as a function of the synthetic method | 10.1002/1097-4628(20010425)80:4<556::AID-APP1130>3.0.CO;2-N | 2001 |
| Conducting SBS block copolymer-polyaniline blends prepared by mechanical mixing | 10.1002/1097-4628(20010425)80:4<626::AID-APP1138>3.0.CO;2-7 | 2001 |
| Poly(ethylene-co-vinyl acetate-g-styrene) from macro transfer agent: Synthesis and use in polymer blend | 10.1016/S0014-3057(00)00168-3 | 2001 |
| Aging effect on the reflectivity measurements of polychloroprene matrices containing carbon black and carbonyl-iron powder | 10.1016/S0141-3910(00)00198-1 | 2001 |
| The compatibilization of SBR/EVA by mercapto-modified EVA | 10.1016/S0014-3057(01)00040-4 | 2001 |
| Conductive polyaniline-SBS blends prepared in solution | 10.1016/S0379-6779(01)00319-8 | 2001 |
| Mercapto-modified copolymer in elastomer blends. III. The effect of functionalized EPDM on curing and mechanical properties of NBR/EPDM blends | 10.1002/app.1821 | 2001 |
| The effect of the vulcanizing system on cure and mechanical properties of NBR/EPDM blends | 2001 | |
| Estudo das propriedades de compósitos de polianilina e resina epoxídica | 2001 | |
| Electrically conductive, melt-processed polyaniline/EVA blends | 10.1002/app.1830 | 2001 |
| Hybrid composites based on polypropylene and carbon fiber and epoxy matrix | 10.1016/S0032-3861(99)00552-2 | 2000 |
| Electroconducting composites based on polyaniline and monomer-swollen polychloroprene | 10.1002/(SICI)1097-4628(19990404)71:14<2329::AID-APP6>3.0.CO;2-Y | 1999 |
| Composite Materials Constituted by a Modified Polypropylene Fiber and Epoxy Resin | 10.1002/(SICI)1097-4628(19990705)73:1<69::AID-APP8>3.3.CO;2-X | 1999 |
| Melt functionalization of EVA Copolymers with Maleic Anhydride | 10.1002/(SICI)1097-4628(19990628)72:14<1799::AID-APP1>3.0.CO;2-G | 1999 |
| The Effect of Hydroxyl-Terminated Polybutadiene - Grafted Carbon Fiber on the Impact Performance of Carbon Fiber - Epoxy Resin Composites | 10.1002/(SICI)1097-4628(19991107)74:6<1424::AID-APP15>3.0.CO;2-2 | 1999 |
| Modificação de Fibra de Carbono com PBLH e sua Utilização em Compósitos com Resina epoxídica | 1999 | |
| Mercapto-modified copolymers in polymer blends. I. Functionalization of EPDM with mercapto groups and its use in NBR/EPDM blends | 10.1002/(SICI)1521-3927(19991001)20:10<526::AID-MARC526>3.0.CO;2-2 | 1999 |
| Preparação de fibras de polipropileno modificadas com grupos mercaptan e sua utilização em compósitos com resina epoxídica | 1999 | |
| Morphological evaluation of polystyrene/EVA blends | 1999 | |
| Interaction of Asphalt with Ground Tire Rubber | 10.1080/10916469908949766 | 1999 |
| Avaliação do desempenho dos materiais absorvedores de radiação eletromagnética por guia de ondas | 1999 | |
| Effect Of The Mold Temperature On The Electrical Properties Of Carbon Black-Loaded Polystyrene/Sb Block Copolymer Blends | 10.1002/(SICI)1097-4628(19980725)69:4<825::AID-APP22>3.0.CO;2-M | 1998 |
| Determination Of The Vinyl Mercaptoacetate Content In Poly(Ethylene-Co-Vinyl Acetate-Co-Vinyl Mercaptoacetate) (Evash) By Tga Analysis And Ftir Spectroscopy | 10.1007/s002890050333 | 1998 |
| Condutividade Elétrica de Misturas de Poliestireno/Polibutadieno e Poliestireno/Copolímero Em Bloco de Estireno-Butadieno Contendo Negro de Fumo | 1998 | |
| Conductive Polyaniline-Polychloroprene Blends | 10.1002/(SICI)1097-4628(19981121)70:8<1543::AID-APP11>3.0.CO;2-F | 1998 |
| Electrical Conductivity Of Polystyrene/Styrene-Butadiene Block Copolymer Blends Containing Carbon Black | 10.1007/s002890050024 | 1997 |
| Polystyrene/Eva Melt Blends Compatibilized With Eva-Graft-Polystyrene | 10.1002/(SICI)1097-4628(19970912)65:11<2141::AID-APP10>3.0.CO;2-6 | 1997 |
| The Possibility Of Living Or Long-Lived Cationic Polymerization In The N-Butyl Vinyl Ether/Iodine/Liquid Sulfur Dioxide System | 10.1002/macp.1997.021980621 | 1997 |
| The Cationic Polymerization Of Alpha-Methylstyrene In Liquid Sulfur Dioxide Initiated By The Hi/Iodine System | 10.1007/s002890050065 | 1997 |
| Electrical Conductivity Of Polystyrene-Rubber Blends Loaded With Carbon Black | 10.5254/1.3538419 | 1997 |
| Thermal Degradation Of Poly(Eval-G-Methyl Methacrylate) | 10.1016/S0141-3910(97)00044-X | 1997 |
| Polyblend Fibers From Polypropylene And Mercapto-Modified Eva | 10.1002/(SICI)1097-4628(19971219)66:12<2243::AID-APP5>3.0.CO;2-G | 1997 |
| Avaliação da Compatibilidade e Reologia de Asfalto Modificado Por Sbs | 1997 | |
| Polymerizations in liquid sulfur dioxide | 10.1016/S0079-6700(96)00025-1 | 1997 |
| The Use Of Eva Containing Mercapto Groups In Natural Rubber-Eva Blends. II. The Effect Of Curing System On Mechanical And Thermal Properties Of The Blends | 10.1002/(SICI)1097-4628(19960725)61:4<591::AID-APP2>3.0.CO;2-G | 1996 |
| Graft Copolymer From Modified Ethylene-Vinyl Acetate Copolymers. III. Poly(Eva-G-Methyl Methacrylate) From Mercapto-Modified Eva | 10.1021/ma950814d | 1996 |
| Polyethylene/Polyamide-6 Blends Containing Mercapto-Modified Eva | 10.1002/(SICI)1097-4628(19960606)60:10<1687::AID-APP21>3.0.CO;2-0 | 1996 |
| Poly(Ethylene-Co-Vinyl Alcohol-Co-Vinyl Mercaptoacetate) (Evalsh) - Determination Of The Vinyl Mercaptoacetate Content By Thermogravimetric Analysis And Ftir Spectroscopy | 10.1007/BF00342451 | 1996 |
| Effect Of Compatibilizer/Curing System On The Thermal Degradation Of Natural Rubber/Eva Copolymer Blends | 10.1016/0141-3910(95)00238-3 | 1996 |
| Solid-State Nmr Study Of Natural Rubber Blended With Eva And Eva Modified With Mercaptoacetic Acid | 10.1007/BF00294124 | 1996 |
| Polyethylene Graft Copolymers With A Liquid Crystalline Component In The Side Chain | 1996 | |
| Cationic Polymerization Of Styrene And Indene In Iodine/Liquid Sulfur Dioxide | 10.1007/BF00295770 | 1996 |
| Compatibilização de Misturas de Nylon-6 e Polietileno de Baixa Densidade Com Eva Contendo Grupos Mercaptan | 1996 | |
| Compatibilização Reativa de Misturas Envolvendo Borracha Natural e Poli(Etileno-Co-Acetato de Vinila)(Eva) | 1996 | |
| The Use Of Eva Containing Mercapto Groups In Natural Rubber-Eva Blends. I. Mechanical, Thermal And Morphological Properties | 10.1002/app.1995.070580111 | 1995 |
| Eva-Based Graft Copolymers As Compatibilizing Agents For Polymer Blends | 1995 | |
| Eva Carrying Mercapto Groups In Polymer Blends | 1995 | |
| Efeito da Adição de Copolímero Graftizado Nas Propriedades Mecânicas e Reológicas de Poliestireno | 1995 | |
| Electrical Conductivity In Carbon Black-Loaded Polystyrene-Polyisoprene Blends. Selective Localization Of Carbon Black At The Interface | 10.1007/BF00312918 | 1995 |
| Cationic Polymerization Of Alpha-Methylstyrene In Liquid Sulfur Dioxide Initiated By P-Methoxybenzyl Chloride | 10.1007/BF00293483 | 1994 |
| Preparação de Poli(Etileno-Co-Acetato de Vinila-G-Metacrilato de Metila) e Sua Utilização Como Agente Compatibilizante Para Misturas Pvc/Eva | 1994 | |
| Graft Copolymers From Modified Ethylene-Vinyl Acetate Copolymers.2. Synthesis Of Eva-G-Psty By Coupling Reaction Of Functionalized Polystyrene And Evaluation Of Its Compatibilizer Character In Psty-Eva Blends | 10.1002/macp.1994.021950913 | 1994 |
| Copolymerization Of Styrene, Maleic Anhydride And Acrylonitrile Ou To High Conversion | 10.1002/macp.1994.021950719 | 1994 |
| Cationic Polymerization In Iodine/Liquid Sulfur Dioxide System.III Investigation About Elementary Steps In Alpha-Methylstyrene Polymerization | 1993 | |
| Graft Copolymers From Modified Ethylene-Vinyl Acetate Copolymer. I. Synthesis Of Poly(Ethylene-Co-Vinyl Acetate-G-Styrene) Using Eva Modified By Mercaptoacetic Acid As Chain Transfer Agent | 10.1002/app.1993.070470812 | 1993 |
| Avaliação da Composição de Terpolímeros de Estireno - Anidrido Maleico - Acrilonitrila | 1993 | |
| Cationic Polymerization In Iodine/Liquid Sulfur Dioxide. I. The Polymerization Of Alpha-Methylstyrene | 10.1007/BF00944815 | 1992 |
| Cationic Polymerization In Iodine/Liquid Sulfur Dioxide. II. The Long-Lived Polymerization Of Alpha-Methylstyrene In Homogeneous Medium | 1992 | |
| Agentes Compatibilizantes Não Reativos Para Blendas Polimericas. I. Síntese de Poli(Etileno-Co-Acetato de Vinila-G-Estireno) | 1992 | |
| An Apparatus For Continuous Monomer Addition In Cationic Polymerization | 10.1002/pola.1989.080270530 | 1989 |
| The Effect Of Continuous Slow Monomer Addition Technique On Cationic Polymerization In Liquid Sulfur Dioxide | 1989 | |
| A Contribution To The Fractionation Of Polystyrene-Poly(Alpha-Methylstyrene) Mixture Using The Mek-Benzene/Methanol System | 10.1007/BF00255213 | 1989 |
| Spectrophotometric Determination Of The Styrene Content In Alpha-Methylstyrene - Styrene Copolymers | 1988 | |
| Polymerization Of Styrene In The System Liquid Sulfur Dioxide - M - Chloroperbenzoic Acid: The Effect Of The Formation Of The Mixed Anhydride. | 10.1002/pola.1987.080250416 | 1987 |
| Poly (Alpha-Methylstyrene - B- Styrene) By A Cationic Mechanism. | 1987 | |
| Uma Experiencia Didatica No Ensino da Quimica Organica Em Laboratorio. | 1987 |
Eventos:
(0.00% eventos com DOI)