José Renato Mendes de Sousa

Instituição:

Universidade Federal do Rio de Janeiro

Centro:

Centro de Tecnologia

Unidade:

Escola Politécnica

Departamento:

Departamento de Expressão Gráfica/Poli

Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
| Pós-Doutorado | 2009 - 2011

Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
Engenharia Civil | Doutorado | 1999 - 2005

Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia
Engenharia Civil | Mestrado | 1997 - 1999

Universidade Federal do Rio de Janeiro
Engenharia Civil | Graduação | 1992 - 1997

Nenhum laboratório cadastrado

(84.62% artigos com DOI)

Exibir resultado(s)

Buscar

Titulo	DOI	Ano
A Finite Element Model for the Instability Analysis of Flexible Pipes Tensile Armor Wires	10.17265/2159-5275/2017.03.006	2017
A modal finite element approach to predict the lateral buckling failure of the tensile armors in flexible pipes	10.1016/j.marstruc.2019.05.006	2019
A New Configuration for Steel Risers in Ultra Deep Waters		2011
A numerical methodology to predict the lateral load response of monopiles installed in SAND considering soil stiffness degradation	10.1016/j.oceaneng.2023.113723	2023
A study on the axial behavior of bonded flexible marine hoses	10.1007/s40868-016-0015-x	2016
A Study on the Holding Capacity Safety Factors for Torpedo Anchors	10.1155/2012/102618	2012
A Theoretical Approach to Predict the Fatigue Life of Flexible Pipes	10.1155/2012/983819	2012
Alternative Solutions of the Geodesic Differential Equations Applied to the Mechanical Analysis of the Tensile Armors of Flexible Pipes under Bending	10.1155/2018/1040973	2018
An Experimental and Numerical Study on the Axial Compression Response of Flexible Pipes	10.1115/1.4005181	2012
An Investigation of the Bisymmetric Hydrostatic Collapse of Flexible Pipes Based on Equivalent Layer Approaches	10.1115/1.4046170	2020

Exibindo 1 a 10 de 26 resultados

(24.37% eventos com DOI)

Exibir resultado(s)

Buscar

Titulo	DOI	Ano
A Comparative Study of Jacket Foundations for Offshore Wind Turbines		2019
A FE Approach to Estimate the Fatigue Resistance of Pressure Armors in Flexible Pipes		2019
A FE Model to Predict the Stress Concentration Factors in the Tensile Armor Wires of Flexible Pipes Inside End Fittings	10.1115/OMAE2013-10995	2013
A Finite Element Model for the Local Mechanical Analysis of Flexible Pipes		2001
A Methodology to Evaluate the Fatigue Life of Flexible Risers		2010
A Methodology to Evaluate the Fatigue Life of Flexible Risers		2009
A Methodology to Predict the Remaining Fatigue Life of a Flexible Pipe With Broken Tensile Armor Wires	10.1115/OMAE2014-23969	2014
A New Configuration for Steel Risers in Ultra Deep Waters		2009
A New Top Connection System for Steel Catenary Risers	10.1115/OMAE2009-79980	2009
A Novel Concept of Flexible Pipe End Fitting: Tensile Armor Foldless Assembly		2012

Exibindo 1 a 10 de 119 resultados