Lavinia Maria Sanabio Alves Borges

Instituição:

Universidade Federal do Rio de Janeiro

Centro:

Centro de Tecnologia

Unidade:

Escola Politécnica

Departamento:

Departamento de Engenharia Mecânica/Poli

ORCID:

https://orcid.org/0000-0001-7754-7221


Formação:

  • Massachusetts Institute of Technology

    | Pós-Doutorado | 2006 - 2007

  • Pontifícia Universidade Católica do Rio de Janeiro

    Engenharia Mecânica | Doutorado | 1985 - 1991

  • Pontifícia Universidade Católica do Rio de Janeiro

    Engenharia Mecânica | Mestrado | 1982 - 1984

  • Universidade do Estado do Rio de Janeiro

    Engenharia Mecânica | Graduação | 1977 - 1981
Laboratórios:
Nenhum laboratório cadastrado
Nuvens de Palavras:
Artigos:

(83.33% artigos com DOI)

Titulo DOI Ano
Parameter Identification of Fractional Index Viscoelastic Model for Vegetable-Fiber Reinforced Composite 10.3390/polym14214634 2022
A visco-hyperelastic model with Mullins effect for polyurethane elastomers combining a phenomenological approach with macromolecular information 10.1016/j.mechmat.2021.104023 2021
Damage identification in plates under uncertain boundary conditions 10.1016/j.ymssp.2020.106884 2020
Limit analysis and frictional contact: formulation and numerical solution 10.1007/s11012-020-01167-5 2020
Computational modeling of viscoplastic polymeric material response during micro-indentation tests 10.1007/s40430-020-02511-2 2020
Dynamic mechanical characterization of epoxy-based thermosetting materials loaded with lignin 10.1007/s40430-020-02479-z 2020
Viscoelastic behavior of polymeric foams: Experiments and modeling 10.1016/j.mechmat.2020.103506 2020
Structural topology optimization under limit analysis 10.1007/s00158-018-2132-y 2019
A Bayesian Framework for the Calibration of Cohesive Zone Modls 10.1080/00218464.2016.1268055 2018
Tensile, Impact, and Thermal Properties of an Epoxynovolac Matrix Composites with Cuban Henequen Fibers 10.1007/s11029-018-9744-6 2018
Comparisons of complex modulus provided by different DMA 10.1016/j.polymertesting.2018.10.034 2018
A general approach for viscoelastic model validation applied on the analyses of epoxy resin modified by end-functionalized liquid polybutadiene 10.1007/s40430-016-0565-z 2017
Bone density growth and the biomechanics of healthy and prosthetic femur 10.1007/s40430-017-0874-x 2017
Limit analysis formulation for frictional problems 10.1007/s00419-017-1304-3 2017
Calibration of adhesion models based on the extended Kalman filtering 10.1080/00218464.2016.1188382 2016
Fabrication of a composite with epoxy matrix and henequen fibers as reinforcement long and with random orientation 2015
Calibration of adhesion models based on Bayesian inference 10.1080/17415977.2015.1077444 2015
A continuum-based mixed shell element for shakedown analysis 10.1016/j.euromechsol.2014.03.003 2014
Quadratic velocity-linear stress interpolations in limit analysis 10.1002/nme.4636 2014
Desarrollo de un material compuesto de fibras de henequén utilizando una matriz termofija 2014
A continuum-based mixed axisymmetric shell element for limit and shakedown analysis 10.1007/s40430-013-0059-1 2013
Effects of Accelerated Ageing in a PTFE Matrix Polymer Composite 10.1002/masy.200900163 2011
Mechanical Characterization of Silica Reinforced-PTFE Matrix Composites 10.1016/j.proeng.2011.04.442 2011
Numerical stress analysis of carbon-fibre-reinforced epoxy composite single-lap joints 10.1016/j.ijadhadh.2011.01.008 2011
The nanogranular origin of friction and cohesion in shale - A strength homogenization approach to interpretation of nanoindentation results 10.1002/nag.984 2011
Plastic collapse in non-associated hardening materials with application to Cam-clay 10.1016/j.ijsolstr.2006.11.026 2007
A Genetic Algorithm Applied to Composite Elastic Parameters Identification 2004
An algorithm for shakedown analysis with nonlinear yield functions 10.1016/S0045-7825(01)00374-7 2002
Numerical and experimental approach for identifying elastic parameters in sandwich plates 2002
An adaptive approach to limit analysis 10.1016/S0020-7683(00)00131-1 2001
A directional error estimator for adaptive limit analysis 10.1016/S0093-6413(99)00062-2 1999
An approach to limit analysis with cone-shaped yield surfaces 10.1002/(SICI)1097-0207(19971115)40:21<4011::AID-NME242>3.0.CO;2-Q 1997
An Nonlinear Optimization Procedure For Limit Analysis 1996
An iterative algorithm for limit analysis with nonlinear yield functions 10.1016/0020-7683(93)90220-2 1993
Programacao Matemática na Análise Limite e sua Aplicação a problemas Planos de Tensão e Deformacão 1990
A force method for elastic-plastic analysis of frames by quadratic optimization 10.1016/0020-7683(88)90030-3 1988
Eventos:

(3.81% eventos com DOI)

Titulo DOI Ano
Evaluation of Lateral Soil Resistance of Buried Pipes by Limit Analysis Considering Friction at Pipe-Soil Interface 2022
LATERAL RESISTANCE OF BURIED PIPES BY FRICTIONAL LIMIT ANALYSIS 2022
EXPERIMENTAL CHARACTERIZATION AND MODELING OF POROVISCOELASTIC MATERIALS 2021
THE EFFECT OF STRESS AND STRAIN CONTROL ON POLYURETHANE ELASTOMERS BEHAVIOR 2021
Modelagem e Identificação de Parâmetros Constitutivos em Plasticidade de Polímeros Fabricados por SLS. 2020
INVERSE CHARACTERIZATION OF THE DAMPING PERFORMANCE OF POROUS MATERIALS 10.48465/fa.2020.0879 2020
Damping performance of porous materials through dynamic analysis 2019
Comparison of complex modulus provided by three different dynamic mechanical analyzers 2018
Uncertainty compensation in damage identification by means of the approximation error approach 2018
Otimização topológica para máxima carga estrutural com restrição volumétrica 10.20906/CPS/CILAMCE2017-1002 2017
NUMERICAL-EXPERIMENTAL MODELS FOR ORTHOGONAL CUTTING 2017
UNCERTAINTY COMPENSATION IN DAMAGE IDENTIFICATION BY MEANS OF THE APPROXIMATION ERROR APPROACH 2017
A critical analysis on the complex modulus provided by DMA 2017
Adhesion: model calibration and validation 2016
BONE DENSITY GROWTH. BIOMECHANICS OF HEALTHY AND PROSTHETIC FEMUR AFTER A TOTAL HIP ARTHROPLASTY. 2016
Limit Analysis on Evaluation of Lateral Resistance of Partially Embedded Pipes with Frictional Pipe-Soil Interface 2015
GROWTH AND REABSORPTION IN BIOLOGICAL TISSUES 2015
Estudo das propriedades mecânicas da resina epoxídica modificada com PBLH 2014
Finite Growth on Biological Tissues 2014
Limit Analysis on Partially Embedded Pipes on Soils. 2014
THEORY AND SIMULATION OF STRESS-INDUCED GROWTH AND REMODELING IN BIOLOGICAL TISSUES: A PRELIMINARY STUDY 2014
Avaliação da delaminação na furação de materiais compósitos com matriz de resina epóxi modificada 2013
Limit analysis for porous materials applied 2013
Calibration of Adhesion Models 2013
Limit analysis for porous materials applied for slope stability analysis 2013
Validation of adhesion models based on Bayesian inference 2012
Analysis of the drilling delamination of composite materials 2012
Drilling delamination of composite materials with fiber modification 2012
Limit analysis on scratch test problem 2012
Bearing Capacity of Embedded Foundation in Porous Materials 2012
Sequential Limit Analysis In Porous Material Processes 2011
MECHANICAL AND ELECTRICAL CHARACTERIZATION OF GRAPHITE/EPOXY COMPOSITES 2011
Limit States for Pipes Under Combined Loads 2011
Influence of friction and cross section reduction on the stress at rupture and failure mode of split-disk ring composite specimens 2011
Limit Analysis for Porous Materials in Plane Strain 2011
A MIXED FORMULATION FOR A CONTINUUM-BASED BEAM ELEMENT 2011
Yield Locus Models of Pressurized Pipes Under Combined Loads 2010
Viscoelastic Modeling Of Silica Reinforced-PTFE Matrix Composites 2009
Plastic Collapse of Pressurized Pipes: A Comparative Study 2009
Plastic Collapse of Pressurized Pipes Under Bending 2009
Limit Analysis Model for Orthogonal Cutting 2009
A Nonlinear Global-Local Model for the Analysis of Laminated Composite Plates 2009
Thermoelastic Response of Functionally Graded Barriers Subjected to Shocks 10.1063/1.2896792 2008
Elasto-plastic stress analysis of thick-walled FGM pipes 10.1063/1.2896766 2008
The Interaction Between Pressure and Bending Loadings in Pipe Collapse 2008
Caracterização do comportamento viscoelastico de compósitos poliméricos 2008
A global-local model for the analysis of laminated composite plates 2008
Limit Analysis Problems Including Frictional Contact 2007
Identification of mechanical properties of polytetrafluoroethylene composit by inverse method 2007
Limit analysis of straight and curved tubes 2007
Limit analysis and unilateral contact 2007
Limit analysis in axisymmetric conditions with cone shaped yield surface 2007
Implementation of Statical Variational Formulations to an Elastic Curved Beam Element 2006
A mixed model and an algorithm for viscoplasticity 2005
A plate finite element coupling first order model and a posteriori error estimator 2005
Performance analysis of functionally graded thermal barriers 2005
Elastoplastic Analysis of Functionally Graded Materials 2005
Identificação de Constantes elástica em laminados compósitos 2004
Thermoelastic analysis of functionally graded material submitted to shock 2004
Optimizing Functionally Graded Material 2004
An approximate analytical solution for the upsetting of a porous disk using Drucker-Prager yield condition 2004
Avaliação de danos por impacto em materiais compósitos 2004
Analysis of an Optimized Functionally Graded Material 2004
High-Cycle Fatigue Predictions By Mesoscopic Elastic Accomodation 2003
Mixed Formulation for Viscoplasticity 2003
Modelo de Primeira Ordem para Laminados Compostos 2003
A numerical-experimental approach for identyfying elastic parameters in composite 2003
Genetic algorithms for identification of elastic constants of composite materials 2002
Genetic Algorithms for identification of elastic constants of composite materials. 2002
Investigação numérica de vibração livre em laminado composto 2002
Error indicator for mixed finite element 2002
An adaptive Approach to Limit Analysis on Soil Mechanics 2001
Uma abordagem numérico-experimental para a identificação de parâmetros elásticos em placas sanduíche 2001
Formulações Mistas para Elastoplasticidade 2001
Formulação Mista para termoelasticidade 2001
A variational formulation and algorithm for collapse in softening materials 2000
An algorithm for elastic shakedown 2000
Variational Formulation for limit analysis with unilateral boundary conditions 2000
Plastic flow by sequential limit analysis 2000
Limit Analysis: variational formulations, numerical solution and error estimator. 2000
An Error Estimator For Adaptive Limit Analysis 1999
A directional error estimator for adaptive limit analysis 1999
The Limit Analysis Aprroach for Orthogonal Cutting 1999
Error estimator and adaptivity for a mixed formulation of limit analysis 1999
Identificação de Constantes Elásticas através de análise modal 1999
A Directional Error Estimator For Adaptive Finite Element Analysis 1998
An Algorithm For Limit Analysis In Soils 1997
Limit Analysis In Soil Mechanics Via Finite Elements 1997
A Directional Error Estimator For Adaptive Limit Analyis 1997
An Finite Element Approach To Limit Analysis In Soils 1997
Limit Analysis In Axisymmetric Conditions With Cone Shaped Yield Surfaces 1997
An Interior Point Optimization Algorithm Fort Frictional Contact Problems In Linear Elasticity 1996
Um Elemento Finito Misto Para Análise Limite Em Sólidos Com Simetria de Revolução 1996
A Metodologia de Análise Limite Aplicada A Conformação de Metais 1995
Algoritmos de Ponto Interior Para Problemas de Contato Em Elasticidade Linear 1995
Um Procedimento Numérico Para Análise Limite Em Solos 1994
Limit Analysis By Nonlinear Programming 1993
Formulação Mista Para Utilização de Elementos Finitos Em Adaptação Elastoplástica 1993
Carga de Colapso Plástico Em Bocais Utilizando Modelo de Sólido de Revolução 1992
An Interior Points Algorithn for Limit Analysis 1991
Elementos Mistos Triangulares Para Análise Limite - Parte I - Formulação 1990
Elementos Mistos Triangulares - ParteII- Solução Iterativa e Aplicações 1990
Formulações Variacionais para Análise Limite 1989
Optimizacion Aplicada A La Formulacion Y Solucion Del Modelo Cinematico Para Elasto Plasticidad. 1988
Analise Limite de Porticos Planos Via Otimizacao 1985
Publicações:
Minha Rede: