Marcelo José Colaço
Instituição:
Universidade Federal do Rio de Janeiro
Centro:
Centro de Tecnologia
Unidade:
Coordenação dos Programas de Pós-Graduação de Engenharia
Departamento:
Programa de Engenharia Mecânica/COPPE
Formação:
-
University of Texas System
| Pós-Doutorado | 2001 - 2002
-
Universidade Federal do Rio de Janeiro
Pós Graduação Em Engenharia de Segurança | Especialização | 1998 - 1999
-
Universidade Federal do Rio de Janeiro
Engenharia Mecânica | Doutorado | 1998 - 2001
-
Universidade Federal do Rio de Janeiro
Engenharia Mecânica | Mestrado | 1996 - 1998
-
Universidade Federal do Rio de Janeiro
Engenharia Mecânica | Graduação | 1992 - 1996
-
Centro Federal de Educação Tecnológica Celso Suckow da Fonseca
Técnico Em Mecânica | Ensino Profissional de nível técnico | 1988 - 1991
-
Colégio Nossa Senhora da Piedade
| Ensino Fundamental (1o grau) | 1984 - 1987
-
Escola Nelson Amado
| Ensino Fundamental (1o grau) | 1979 - 1983
Laboratórios:
Nuvens de Palavras:
Artigos:
(89.29% artigos com DOI)
| Titulo | DOI | Ano |
|---|---|---|
| Estimation of Internal Heat Flux on Pulsating Heat Pipes using Kalman Filter: Numerical and Experimental Results | 10.1088/1742-6596/2685/1/012071 | 2024 |
| Monitoring internal heat fluxes on Pulsating Heat Pipes using Kalman filter - Numerical and experimental results | 10.1016/j.applthermaleng.2024.122801 | 2024 |
| Online estimation of inlet contaminant concentration using Eulerian-Lagrangian method of fundamental solutions and Bayesian inference | 10.1016/j.camwa.2024.04.019 | 2024 |
| An Eulerian-Lagrangian method of fundamental solutions for the advection-diffusion equation with time dependent coefficients | 10.1016/j.enganabound.2024.105766 | 2024 |
| Nonintrusive thermal contact conductance estimation in double-layered pipelines: A reciprocity functional method perspective | 10.1080/10407782.2024.2364059 | 2024 |
| Parameter estimation with the Markov Chain Monte Carlo method aided by evolutionary neural networks in a water hammer model | 10.1007/s40314-022-02162-0 | 2023 |
| Inverse problem estimation of internal heat transfer coefficients in ducts through a time-dependent reciprocity functional method | 10.1007/s40314-022-02169-7 | 2023 |
| Local heat flux estimation inside tubes through conjugate gradient method with adjoint operator: application to the pulsating heat pipes case | 10.1108/HFF-09-2022-0547 | 2023 |
| Thermal Contact Conductance Estimation on Irregular Interfaces Using the Reciprocity Functional Method | 10.1080/01457632.2023.2178280 | 2023 |
| Transient Source Terms Estimate in Advection-Diffusion Problems Using the Method of Fundamental Solutions and an Eulerian-Lagrangian Transformation | 10.1080/01457632.2023.2241171 | 2023 |
| An Eulerian-Lagrangean integral transform technique for solving advective-diffusive problems | 10.1016/j.icheatmasstransfer.2022.105976 | 2022 |
| NUMERICAL ANALYSIS OF A MHD GENERATOR WITH HELICAL GEOMETRY | 10.1615/computthermalscien.2022042038 | 2022 |
| Automatic selection of regularization parameter in inverse heat conduction problems | 10.1016/j.icheatmasstransfer.2022.106403 | 2022 |
| Computational model of silica nanoparticle penetration into tumor spheroids: Effects of methoxy and carboxy |
10.1002/cnm.3504 | 2021 |
| Real-time temperature estimation with enhanced spatial resolution during MR-guided hyperthermia therapy | 10.1080/10407782.2020.1720409 | 2020 |
| Estimation of Thermal Contact Conductances on Irregular Interfaces Using the Generalized Integral Transform Technique and the Reciprocity Functional Method | 10.1142/s0219876220500371 | 2020 |
| Numerical investigation for steam tubes temperature reduction in a four fuels tangentially fired boiler | 10.1016/j.applthermaleng.2020.115656 | 2020 |
| Characterisation of the heat transfer in displaced enhancement devices by means of inverse problem approach applied to IR images | 10.1080/17686733.2019.1700696 | 2019 |
| State Estimation for the Thermal Storage in Phase Change Materials Containing Nanoparticles | 2018 | |
| State estimation problems in PRF-shift magnetic resonance thermometry | 10.1108/HFF-10-2016-0427 | 2018 |
| Internal heat transfer coefficient estimation in three-dimensional ducts through the reciprocity functional approach - An analytical approach and validation with experimental data | 10.1016/j.ijheatmasstransfer.2018.01.102 | 2018 |
| APPLICATION OF NONLINEAR MULTIVARIABLE MODEL PREDICTIVE CONTROL TO TRANSIENT OPERATION OF A GAS TURBINE AND NOX EMISSIONS REDUCTION | 10.1016/j.energy.2018.02.042 | 2018 |
| Filtered reciprocity functional approach to estimate internal heat transfer coefficients in 2D cylindrical domains using infrared thermography | 10.1016/j.ijheatmasstransfer.2018.04.089 | 2018 |
| Nonlinear Model Predictive Control applied to Transient Operation of a Gas Turbine | 10.13044/j.sdewes.d6.0220 | 2018 |
| An extension of the reciprocity functional approach to the estimate of two-dimensional spatially dependent thermal contact conductances using regularization via TSVD: numerical and experimental results | 10.1007/s40430-018-1344-9 | 2018 |
| Detection of contact failures with the Markov chain Monte Carlo method by using integral transformed measurements | 10.1016/j.ijthermalsci.2018.06.006 | 2018 |
| Determination of thermal conductivity of inhomogeneous orthotropic materials from temperature measurements | 10.1080/17415977.2018.1554654 | 2018 |
| Estimating Gasoline Performance in Internal Combustion Engines with Simulation Methamodels | 10.1016/j.fuel.2016.12.057 | 2017 |
| Self-Organizing Maps for Pattern Recognition in Design of Alloys | 10.1080/10426914.2017.1279319 | 2017 |
| Bayesian estimate of pre-mixed and diffusive rate of heat release phases in marine diesel engines | 10.1007/s40430-016-0649-9 | 2017 |
| Knocking prediction in internal combustion engines via thermodynamic modeling: preliminary results and comparison with experimental data | 10.1007/s40430-016-0519-5 | 2017 |
| Inverse Parameter Identification in Solid Mechanics Using Bayesian Statistics, Response Surfaces and Minimization | 2016 | |
| Thermography detection of contact failures in double layered materials using the reciprocity functional approach | 10.1016/j.applthermaleng.2016.02.078 | 2016 |
| An analytical method to estimate spatially-varying thermal contact conductances using the reciprocity functional and the integral transform methods: Theory and experimental validation | 10.1016/j.ijheatmasstransfer.2016.04.052 | 2016 |
| Real-time identification of a high-magnitude boundary heat flux on a plate | 10.1080/17415977.2016.1195829 | 2016 |
| Algorithms for design optimization of chemistry of hard magnetic alloys using experimental data | 10.1016/j.jallcom.2016.04.218 | 2016 |
| Inverse determination of spatially varying material coefficients in solid objects | 10.1515/jiip-2015-0057 | 2016 |
| Multi-objective Optimization of Micro Pin-Fin Arrays for Cooling of High Heat Flux Electronics with a Hot Spot | 10.1080/01457632.2016.1242953 | 2016 |
| Transient Non-Intrusive Method for Estimating Thermal Contact Conductance by Means of the Reciprocity Functional Approach | 10.1080/17415977.2014.933830 | 2015 |
| A Backward Reciprocity Function Approach to the Estimation of Spatial and Transient Thermal Contact Conductance in Double-Layered Materials Using Non-Intrusive Measurements | 10.1080/10407782.2014.994435 | 2015 |
| Estimation of a Location-and-Time Dependent High Magnitude Heat Flux in a Heat Conduction Problem Using the Kalman Filter and the Approximation Error Model | 10.1080/10407782.2015.1037136 | 2015 |
| The reciprocity function approach applied to the non-intrusive estimation of spatially varying internal heat transfer coefficients in ducts: numerical and experimental results | 10.1016/j.ijheatmasstransfer.2015.07.028 | 2015 |
| Inverse heat transfer problems: an application to bioheat transfer | 2015 | |
| Accelerated Bayesian Inference for the Estimation of Spatially Varying Heat Flux in a Heat Conduction Problem | 10.1080/10407782.2013.812008 | 2014 |
| Heat Transfer Coefficient Estimation of an Internal Combustion Engine Using Particle Filters | 10.1080/17415977.2013.797411 | 2014 |
| Inverse determination of blood perfusion coefficient by using different deterministic and heuristic techniques | 10.1007/s40430-013-0065-3 | 2014 |
| Application of the generalized Polynomial Chaos expansion to the simulation of an internal combustion engine with uncertainties | 10.1016/j.fuel.2014.05.062 | 2014 |
| Application of Particle Filters to Regional-Scale Wildfire Spread | 2014 | |
| RADIAL BASIS FUNCTION APPLIED TO THE SOLUTION OF MHD FLOW IN A TILTED CAVITY | 10.1615/ComputThermalScien.2014010442 | 2014 |
| Experimental Study of Ternary Fuel Blends on an ASTM-CFR-Cetane Engine | 2014 | |
| Otimização de Termos Fontes em Modelos de Biotransferência de Calor em Cirurgias Oftalmológicas a Laser | 2013 | |
| Viscosidade e Desempenho de Misturas Diesel/Biodiesel em um Motor Monocilíndrico | 2013 | |
| Analysis of NOx Emissions and Specific Fuel Consumption of a Diesel Engine Operating with Diesel/Biodiesel Blends | 2013 | |
| Response Surface Method Applied to the Thermoeconomic Optimization of a Complex Cogeneration System Modeled in a Process Simulator | 10.1016/j.energy.2012.12.049 | 2013 |
| A Fast Non-Intrusive Method for Estimating Spatial Thermal Conductivity by Means of the Reciprocity Functional Approach and the Method of Fundamental Solutions | 10.1016/j.ijheatmasstransfer.2013.01.026 | 2013 |
| Automatic Switching Algorithms in Hybrid Single-Objective Optimization | 2013 | |
| Application of Two Bayesian Filters to Estimate Unknown Heat Fluxes in a Natural Convection Problem | 10.1115/1.4006487 | 2012 |
| State Estimation Problems in Heat Transfer | 10.1615/Int.J.UncertaintyQuantification.2012003582 | 2012 |
| Hydrous ethanol-gasoline blends - Combustion and emission investigations on a Flex-Fuel engine | 10.1016/j.fuel.2012.03.018 | 2012 |
| Inverse Problems in Aerodynamics, Heat Transfer, Elasticity and Materials Design | 10.5139/IJASS.2012.13.4.405 | 2012 |
| Stress Corrosion Cracking Resistant Aluminum Alloys: Optimizing Concentrations of Alloying Elements and Tempering | 10.1080/10426914.2010.536938 | 2011 |
| Thermal Analysis of a Diesel Engine Operating with Diesel-Biodiesel Blends | 10.1016/j.fuel.2010.07.021 | 2010 |
| Thermodynamic simulation and optimization of diesel engines operating with diesel and biodiesel blends using experimental data | 10.1080/17415977.2010.492518 | 2010 |
| Single and Multi-Objective Optimization of a Cogeneration System Using Hybrid Algorithms | 10.1080/01457630802375048 | 2009 |
| Magnetohydrodynamic simulations using radial basis functions | 10.1016/j.ijheatmasstransfer.2009.08.009 | 2009 |
| Recovering the Source Term in a Linear Difusion Problem by the Method of Fundamental Solutions | 10.1080/17415970802083243 | 2008 |
| Estimation of the Heat Transfer Coefficient by Means of the Method of Fundamental Solutions | 10.1080/17415970802082948 | 2008 |
| A Response Surface Method Based Hybrid Optimizer | 10.1080/17415970802082724 | 2008 |
| Approximation of the likelihood function in the Bayesian technique for the solution of inverse problems | 10.1080/17415970802231677 | 2008 |
| Optimizing chemistry of bulk metallic glasses for improved thermal stability | 10.1088/0965-0393/16/7/075010 | 2008 |
| Solidifcation of Double-Diffusive Flows using Thermo-Magneto-Hydrodynamics and Optimization | 10.1080/10426910701322583 | 2007 |
| Identification and Design of a Source Term in a Two-Region Heat Conduction Problem | 10.1080/17415970701198159 | 2007 |
| Inverse and Optimization Problems in Heat Transfer | 10.1590/S1678-58782006000100001 | 2006 |
| A Multilevel Hybrid Optimization of Magnetohydrodynamic Problems in Double-Diffusive Fluid Flow | 10.1016/j.jpcs.2006.05.036 | 2006 |
| Coupled Conduction-Radiation in Semi-Transparent Materials at High Temperatures | 10.1016/j.jpcs.2006.06.007 | 2006 |
| Convective Heat Transfer Control Using Magnetic and Electric Fields | 10.1615/JEnhHeatTransf.v13.i2.40 | 2006 |
| Control of Unsteady Solidification via Optimized Magnetic Fields | 10.1081/AMP-200053456 | 2005 |
| Optimization of Intensities, and Orientations of Magnets Controlling Melt Flow During Solidification | 10.1081/AMP-200031887 | 2004 |
| Inverse Natural Convection Problem of Simultaneous Estimation of Two Boundary Heat Fluxes in Irregular Cavities | 10.1016/j.ijheatmasstransfer.2003.09.007 | 2004 |
| Optimization of Wall Electrodes for Electro-Hydrodynamic Control of Natural Convection During Solidification | 10.1081/AMP-200028114 | 2004 |
| An Inverse Method Allowing User-Specified Layout of Magnetized Micro-Fibers in Solidifying Composites | 10.1177/0021998303034308 | 2003 |
| Inverse Problem of Simultaneous Estimation of Two Boundary Heat Fluxes in Parallel Plate Channels | 10.1590/S0100-73862001000200007 | 2001 |
| Inverse Forced Convection Problem of Simultaneous Estimation of Two Boundary Heat Fluxes in Irregularly Shaped Channels | 10.1080/10407780117384 | 2001 |
| A Comparison of Different Versions of the Conjugate Gradient Method of Function Estimation | 10.1080/104077899274859 | 1999 |
Eventos:
(4.00% eventos com DOI)
| Titulo | DOI | Ano |
|---|---|---|
| Estimation of Thermal Contact Conductance in Ducts Using the Reciprocity Functional Approach | 2023 | |
| Kalman Filter Application for Real-Time Estimation of Internal Heat Flux on Pulsating Heat Pipes | 2023 | |
| Transient Flows with Cavitation of Biodiesel in Pipelines | 2023 | |
| Thermal Contact Conductance Estimation using Optimization Algorithms | 2023 | |
| Estimation of Spatially Varying Thermal Contact Conductances in Dual Layer Pipes using the Reciprocity Functional Approach | 2023 | |
| Estimation of Internal Heat Flux on Pulsating Heat Pipes using Kalman Filter: Numerical and Experimental Results | 2023 | |
| Real-Time Internal Heat Flux Estimation on Pulsating Heat Pipes Using Kalman Filter | 2022 | |
| Thermal Contact Conductance Estimation Using a Time-Dependent Method of Fundamental Solutions | 2022 | |
| Thermal Contact Conductance Estimation Using the Reciprocity Functional and an Orthogonal Decomposition for the Measurements | 2022 | |
| Escoamento com Cavitação em Dutos com Transporte de Biocombustíveis | 2022 | |
| Numerical Optimization of a Rectangular MHD Pump | 2021 | |
| Estimation of Thermal Contact Conductance on Irregular Interfaces Using the Reciprocity Functional Approach | 2021 | |
| Numerical Analysis of a MHD Generator with Helical Geometry | 2021 | |
| Thermo-economic Analysis of S-CO2 Power Cycles for Wast Heat Recovery Applications | 2021 | |
| State Estimation Problem in Nano-Enhance Phase Change Materials for Thermal Energy Storage | 2021 | |
| Particle Filter-Model Predictive Control for Oil Reservoir Management | 2021 | |
| A particle-filter based framework for inverse problems using ANSYS Fluent and Python | 2021 | |
| Sequential Boundary Heat Flux Estimation Using the Method of Fundamental Solutions and Bayesian Filters | 2021 | |
| Numerical Analysis of Alternating Current MHD Pump with Rectangular Section for Electrolyte Solutions | 2020 | |
| Numerical Modelling of First-Order Wave Propagation by Euler-Lagrange Method of Fundamental Solutions | 2020 | |
| Parameter and State Estimation for Transient Heat Conduction Problems Combined Method of Fundamental Solution with Particle Filters | 2019 | |
| Estimation of Thermal Contact Conductances on Irregular Interfaces using the Generalized Integral Transform Technique and the Reciprocity Functional Method | 2019 | |
| A Surrogate Model Based on Proper Orthogonal Decomposition and Radial Basis Functions for the Analysis of Phase Change Materials Containing Nanopartices | 2019 | |
| Recovering Thermal Contact Conductances in Three-Dimensional Layered Materials via Reciprocity Functional Analysis and TSVD Regularization Technique | 2018 | |
| Internal Heat Transfer Coefficient Estimation in Ducts Through the Reciprocity Functional Approach and Integral Transform Technique | 2018 | |
| An Analytical Extension of the Reciprocity Functional Approach to Estimate Thermal Contact Conductances Between Different Materials using Transient Measurements | 2018 | |
| Three-Dimensional Numerical Simulations of Helicoidal MHD Pumps | 2018 | |
| Shape Optimisation of Displaced Enhancement Devices for Heat Transfer Augmentation by Inverse Problem Approach Applied to Infrared Images | 2018 | |
| Application of WAF-TVD Scheme for Water Hammer Equations | 2018 | |
| Application of Nonlinear Model Predictive Control to Transient Operation of a Gas Turbine | 2017 | |
| Gaussian Hypermodel Applied to Failure Analisys of Laminated Composites | 2017 | |
| Thermal Analysis of the Removal of Paraffin Blockages in Oil Pipelines via the Nitrogen Generating System (SGN) | 2017 | |
| Estimation of Internal Heat Transfer Coefficients in Three-Dimensional Ducts Through the Reciprocity Functional Approach: Preliminary Results | 2017 | |
| Materials Processing Control using Electric and Magnetic Fields | 2017 | |
| Experimental Validation of a Fully Analytical Method for Determining Thermal Contact Conductances in Double-Layered Materials using the Reciprocity Functional and the Integral Transform Approaches | 2016 | |
| Prediction of Gasolines Performance in Internal Combustion Engines using RBF- and Kriging-based Metamodels | 2016 | |
| Study of the Effects of Preferential Diffusion in Ethanol Laminar Reactive Flows | 2016 | |
| Application of Approximate Bayesian Computation for the Estimation of Parameters in a Model for the Calcium Dynamics in Neurons | 2016 | |
| Concentrating Linear Fresnel Reflector Working with Supercritical CO2 Power Cycles | 2016 | |
| State Estimation Problems in PRF-Shift Magnetic Resonance Thermometry | 2016 | |
| Parameter Estimation Using Approximate Bayesian Computation in a Model for Ionic Transfer in Excitable Cells | 2016 | |
| Identification of a Position and Time Dependent Heat Flux Using the Unscented Kalman Filter in 3D Nonlinear Heat Conduction | 2015 | |
| Magnetic Alloys Design Using Multi-Objective Optimization | 2015 | |
| Application of a Bayesian Technique to Estimate the Hidden States of the Biophysical Model for Calcium Oscillations in Neurons | 2015 | |
| Estimation of Two-Dimensional Thermal Contact Conductances using the Reciprocity Functional Approach | 2015 | |
| Optimization of Extended Surfaces on Tubes of the Radiant Section of Fired Heaters Using the Response Surface Methodology | 2015 | |
| Inverse Parameter Identification using Bayesian Statistics and Response Surfaces | 2015 | |
| Multi-Objective Optimization of Micro Pin-Fin Arrays for Cooling of High Heat Flux Electronics with a Hot Spot | 2015 | |
| Inverse Determination of Spatial Variation of Diffusion Coefficients in Arbitrary Objects Creating Desired Non-Isotropy of Field Variables | 2015 | |
| Prediction of Gasolines Performance in Internal Combustion Engines Using Kriging Metamodels | 10.4271/2015-36-0189 | 2015 |
| Optimization of a Transcritical CO2 Power Cycle as Bottoming Cycle for an Aeroderivative Gas Turbine (Keynote Lecture) | 2015 | |
| Detection of Contact Failures in Composites using Infrared Thermography and the Reciprocity Functional Approach | 2015 | |
| Inverse Problem Estimation of a TwoDimensional Thermal Contact Conductance Between Two Different Materials Using the Reciprocity Functional | 2015 | |
| Identification of Material Properties Through a Markov Chain Monte Carlo Technique and a Response Surface Approximation | 2015 | |
| Application of the Markov Chain Monte Carlo Method to Estimate Parameters in the Calcium Release Induced Models in Neurons | 2015 | |
| Bayesian Estimation of Parameters in the Bioheat Transfer Equation | 2015 | |
| Analytical NonIntrusive Technique to Estimate Thermal Contact Conductances in Double Layered Materials by Combining the Reciprocity Functional and the Integral Transform Approaches | 2015 | |
| Design and Optimization of Rare-Earth Free Hard Magnetic Alloys and Nickel-Based Superalloys for High Temperature Applications | 2015 | |
| Otimização de Misturas Ternárias de Diesel, Biodiesel e Etanol | 2015 | |
| Técnicas Bayesianas Aplicadas à Estimativa de Parâmetros em Motores de Combustão Interna | 2015 | |
| Banco de Provas para Determinação de Depósitos em Bicos Injetores usando Biocombustíveis | 2015 | |
| Estudo do Efeito Magnetohidrodinâmico em um Fluido Eletrolítico por meio de Análises Numéricas e Experimentais | 2015 | |
| Análise e Otimização de Ciclo Combinado Gás-Vapor Alimentado por Biocombustíveis | 2015 | |
| Sistema Transiente para Aquisição de Temperaturas usando Raspberry Pi | 2015 | |
| A Biophysical Model to Explain Sustained Oscillations in the Trans-membrane Current of Cytomegalic Neurons | 2015 | |
| Multi-Objective Design and Optimization of Hard Magnetic Alloys Free of Rare Earths | 2015 | |
| Algorithms for Design Optimization of Hard Magnetic Alloys Using Experimental Data | 2015 | |
| A Non-Intrusive Inverse Problem Technique for the Identification of Contact Failures in Double-Layered Composites | 10.1615/IHTC15.inv.009532 | 2014 |
| A Backward Reciprocity Function to Estimate Spatial and Transient Unknown Heat Fluxes in Multilayered Composites Using Non-Intrusive Measurements | 2014 | |
| Prediction of Internal Combustion Engines Performance Related to Fuel Properties using Radial Basis Functions | 2014 | |
| The Effect of Surface Functionalization and Temperature on Nanoparticle Penetration into Tumor Spheroids | 2014 | |
| Identification of a Position and Time Dependent Heat Flux Using the Kalman Filter and Improved Lumped Analysis in Heat Conduction | 2014 | |
| Methods for the Determination of Ignition Delay in a Marine Diesel Engine Operating with Marine Diesel Oil | 2014 | |
| A Comparison of Particle Filters Applied to the Heat Transfer Coefficient Estimation in Internal Combustion Engines | 2014 | |
| Estimation of a Spatial and Time Dependent High Magnitude Heat Flux Using the Kalman Filter | 2014 | |
| Experimental Study of Ternary Fuel Blends on an ASTM-CFR-Cetane Engine | 2014 | |
| Detection of Contact Failures in Laminated Composites by Infrared Thermography: Description of the Experimental Apparatus and Initial Results | 2014 | |
| Bayesian Estimate of Mass Fraction of Burned Fuel in Internal Combustion Engines using Pressure Measurements | 2014 | |
| Simulation under Uncertainty of Heat Conduction in Heterogeneous Media Combining Integral Transform and Polynomial Chaos | 2014 | |
| Bayesian Estimation of Parameters in Hodgkin-Huxley's Model of Biomedical Electric Signals | 2014 | |
| Uso de Misturas Ternárias QAV-Biodiesel-Etanol em Turbinas a Gás | 2014 | |
| Medidas de Empuxo em Turbinas utilizando Biocombustíveis | 2014 | |
| Otimização de Motores de Combustão Interna através de Métodos sem Malha | 2014 | |
| Técnicas Bayesianas aplicadas à Estimativa de Parâmetros em Motores de Combustão Interna | 2014 | |
| Estimativa de Taxa de Liberação de Calor de um Motor Marítimo Diesel usando Filtros de Partículas | 2014 | |
| Optimization of Reacting Flow using Magnetic Fields | 2014 | |
| Parameter Identification in Combustion Processes Using Bayesian Techniques | 2014 | |
| Application of Particle Filters in Moving Frontier Problems | 2013 | |
| Non-Intrusive Transient Method for Estimating Spacial Thermal Contact Resistance Using the Reciprocity Functional Approach | 2013 | |
| State Estimation Problem for Hodgkin-Huxley's Model: A Comparison of Particle Filter Algorithms | 2013 | |
| Multi-Objective Optimization of an Evaporative-Regenerative Cycle | 2013 | |
| Analysis of Prior Information for the Bayesian Estimation of Parameters in Hodgkin-Huxley's Model | 2013 | |
| Some Applications of Bayesian Filters to Biomedical Engineering | 2013 | |
| Inverse Determination of Spatially Varying Thermal Conductivity in Two-Dimensional Objects | 2013 | |
| A Comparison of Two Inverse Problem Techniques for the Identification of Contact Failures in Multi-Layered Composites | 2013 | |
| State Estimation Problem for the Action Potential Modeling in Purkinje Fibers | 2013 | |
| Hybrid Optimization Algorithms and Hybrid Response Surfaces (Plenary Lecture) | 2013 | |
| Escoamentos na Presença de Campos Magnéticos | 2013 | |
| Análise de Parâmetros de Combustão e Emissões de Poluentes de Combustíveis Marítimos | 2013 | |
| Técnicas Bayesianas Aplicadas à Estimativa do Coeficiente de Transferência de Calor em Motores de Combustão Interna | 2013 | |
| Estudo Comparativo entre as Correlações do Coeficiente de Transferência de Calor e os Modelos de Combustão | 2013 | |
| Cálculo do Atraso de Ignição de um Motor Marítimo Diesel com Base nas Curvas de Pressão | 2013 | |
| Técnicas Bayesianas Aplicadas a Estimativa de Parâmetros em Motores de Combustão Interna | 2013 | |
| Otimização de Escoamentos Reativos Utilizando Campos Magnéticos | 2013 | |
| Estudo Experimental do Uso de Misturas Combustíveis Ternárias em um Motor CFR/ASTM-Cetano | 2013 | |
| Medidas de Empuxo em Turbinas Utilizando Biocombustíveis | 2013 | |
| Uso de Misturas Ternárias QAV-Biodiesel-Etanol em Turbinas a Gás | 2013 | |
| Metodologias para Determinação da Qualidade de Ignição de Combustíveis e Emissões em Motores Diesel | 2013 | |
| Banco de Provas para Motores a Biocombustíveis | 2013 | |
| Banco de Prova para Avaliação de Depósitos em Bicos Injetores de Motores Diesel | 2013 | |
| Estudo dos Efeitos de Difusão Preferencial em Escoamentos Reativos de Biocombustíveis | 2013 | |
| Stationary and transient source reconstruction in Cartesian geometry | 2012 | |
| A Comparison of the Iterative Regularization Technique and the Kalman Filter for the Estimation of Boundary Heat Flux in Grinding | 2012 | |
| Application des filtres de particules à l?estimation de la vitesse de propagation d?incendies | 2012 | |
| Estimativa do Potencial de Ação de Células Usando o Modelo de Hodgkin-Huxley e Filtro de Particulas | 2012 | |
| Uncertainties on the inverse source problem for elliptic boundary value problems | 2012 | |
| Estimation of Unknown Contact Resistance by Means of Reciprocity Function Approach | 2012 | |
| Fast Bayesian Inference for an Inverse Heat Transfer Problem using Approximations | 10.1109/I2MTC.2012.6229538 | 2012 |
| Combustion and emission analysis of different hydrous ethanol-gasoline blends on a Flex-Fuel Engine | 2012 | |
| Computer Simulation of a Flex-Fuel Engine Running on Different Gasoline-Hydrous Ethanol Blends | 10.4271/2012-36-0487 | 2012 |
| In Cylinder Pressure Curve and Combustion Parameters Variability with Ethanol Addition | 10.4271/2012-36-0486 | 2012 |
| Heat Transfer Coefficient Estimation of an Internal Combustion Engine using Particle Filters | 2012 | |
| A Meshless Method Applied to the Heat Transfer Analysis of a Diesel Engine Piston | 2012 | |
| Themodynamic Simulation of an Internal Combustion Engine Using Particle Filters | 2012 | |
| Analysis of Biofuels Reacting Flows in Ducts | 2012 | |
| Experimental Investigation of the Ignition Delay and Gaseous Emissions of Different Diesel and Biodiesel Blends on a Variable Compression Rate Engine | 2012 | |
| MHD Flow in a Tiltied Cavity using Radial Basis Functions | 2012 | |
| Application of the Generalized Polynomial Chaos Expansion to the Simulation of an Internal Combustion Engine Fueled with Ethanol | 2012 | |
| Análise de Parâmetros de Combustão de Combustíveis Martítimos | 2012 | |
| Estudo da Transferência de Calor em um Pistão de um Motor de Combustão Interna em Regime Permanente | 2012 | |
| Técnicas Bayesianas Aplicadas à Estimativa de Parâmetros em Motores de Combustão Interna | 2012 | |
| Application of Bayesian Filters to a One-Dimensional Solidification Problem | 2011 | |
| Analysis of NOx Emissions and Specific Fuel Consumption of a Diesel Engine Operating with Diesel/Biodiesel Blends | 2011 | |
| Numerical Simulation of the Performance of a Marina Engine Using Diesel and Blends of Marine Diesel with Ethanol | 2011 | |
| Application of a Bayesian Filter to Estimate Unknown Heat Fluxes in a Natural Convection Problem | 10.1115/DETC2011-47652 | 2011 |
| Kalman and Particle filters | 2011 | |
| Different Hydrous Ethanol-Gasoline Blends - FTIR Emissions of a Flex-Fuel Engine and Chemical Properties of the Fuels | 10.4271/2011-36-0080 | 2011 |
| Evaluation of Bayesian Filters Applied to Heat Conduction Problems | 2010 | |
| Comparative Analysis of Stochastic and Pattern Search Methods Applied to Thermoeconomic Optimization of a Complex Cogeneration System Modeled in a Process Simulator | 2010 | |
| Experimental Investigation of Different Hydrous Ethanol-Gasoline Blends on a Flex-Fuel Engine | 10.4271/2010-36-0469 | 2010 |
| Bancada Didática para Teste de Motores de Veículos Ciclomotores | 2010 | |
| Conjugate Gradient Method with Adjoint Problem Applied to the Inverse Determination of the Spatial Variation of the Blood Perfusion Coefficient in Cancerous Tissues | 2009 | |
| Analysis of Exhaust Emissions in a Stationary Diesel Engine Operating with Diesel/Biodiesel Blends | 2009 | |
| Performance and Emissions Comparative Analysis of an Engine Operating with Two Palm Oil Methyl Esters and their Blends with Diesel | 2009 | |
| Optimization of Source Terms in Bioheat Transfer Problems | 2009 | |
| A Survey of Basic Deterministic, Heuristic and Hybrid Methods for Single Objective Optimization and Response Surface Generation | 2009 | |
| Parameter Identification and Optimization of a Thermodynamic Model of Diesel Engines Operating with Diesel/Biodiesel Blends | 2009 | |
| Heat Transfer Analysis of a Diesel Engine Piston Operating with Diesel/Biodiesel Blends | 2009 | |
| A Comparison among Different Response Surface Methods | 2008 | |
| Magneto-Hydrodynamic Simulations using Radial Basis Functions | 2008 | |
| A Hybrid RBF Based Methods for Highly Multidimensional Response Surfaces Using Scarce Data Sets | 2008 | |
| Identification of Parameters in a System of Differential Equations Modeling Evolution of Infectious Diseases | 2008 | |
| Bayesian Estimation of the Thermal Conducitivity Components of Orthotropic Solids | 2008 | |
| Inverse Problem of Estimation of the Blood Perfusion Coefficient in Cancerous Tissues Subjected to Hyperthermic Treatments | 2008 | |
| Response Surface Methods Applied to Scarce and Small Sets of Training Points ? A Comparative Study | 2008 | |
| Application of Bayesian Filters to Heat Conduction Problems | 2008 | |
| Análise do Uso de Veiculos Semi-Autônamos, Baseados em Plataformas Aeroestáticas, para Operações de Vigilância em Áreas Extensas | 2008 | |
| A Multi-Objective Optimization of Active Heating in Pipe-in-Pipe Systems with Multiple Insulating Layers | 2008 | |
| Radial Basis Functions Applied to the Solution of the Natural Convection Problem in Square Cavities | 2008 | |
| Estimation of the Heat Transfer Coefficient by Means of the Method of Fundamental Solutions | 2007 | |
| Application of Hybrid Optimization Algorithms to a Reference Cogeneration System | 2007 | |
| Solving an Inverse Source Problem with the MFS and Higher Order Direct Problem | 2007 | |
| A Comparison of Two Methods for Fitting High Dimensional Response Surfaces | 2007 | |
| Approximation of the Likelihood Function in the Bayesian Technique for the Solution of Inverse Problems | 2007 | |
| Desenvolvimento de uma Metodologia para o Projeto de Veículos Aeroflutuantes | 2007 | |
| A Multi-Objective Optimization of a Cogeneration System | 2007 | |
| Electro-Thermo-Hydrodynamic Control of Solidification of Binary Mixtures | 2007 | |
| A Multi-Objective Optimization of Active Heating in Pipe-In-Pipe Systems Based on Game Theory | 2007 | |
| Identification of the Thermophysical Properties of Orthotropic Semi-Transparent Materials | 2006 | |
| Controlling Solidification of Particle Laden Melts Using Thermo-Magnetohydrodynamics and Optimization | 2006 | |
| On the use of MFS in Linear Inverse Diffusion Problems | 2006 | |
| On the Solution of Difusion-Convection Problems by Means of RBF Approximations | 2006 | |
| Application of Genetic, Gradient, and Hybrid Optimization Strategies to a Reference Cogeneration System: A Comparative Study | 2006 | |
| Uma Estratégia para Problemas de Otimização Multiobjetivos | 2006 | |
| Estimation of Spatially and Time Dependent Source-Term in a Two-Region Problem | 2005 | |
| Obtaining Pre-Specified Concentration Profiles in Thermosolutal Flows by Applying Magnetic Fields Having Optimized Intensity Distribution | 2005 | |
| A Multilevel Hybrid Optimization of Magnetohydrodynamic Problems in Double-Diffusive Fluid Flow | 2005 | |
| Coupled Conduction-Radiation in Semi-Transparent Materials at High Temperatures | 2005 | |
| Magnetohydrodynamic Optimization of the Fluid Flow During the Solidification of Binary Mixtures in Enclusures | 2005 | |
| Reduced Model For Parameter Estimation In Coupled Conduction-Radiation | 2005 | |
| Convective Heat Transfer Control Using Magnetic and Electric Fields (Keynote Lecture) | 2004 | |
| Inverse and Optimization Problems in Heat and Mass Transfer (Invited Short-Course) | 2004 | |
| Reducing Convection Effects in Solidification by Appling Magnetic Fields Having Optimized Intensity Distribution (Keynote Lecture) | 2003 | |
| A Comparison of Two Solution Techniques for the Inverse Problem of Simultaneously Estimating the Spatial Variations of Diffusion Coefficients and Source Terms | 2003 | |
| An Inverse Method for Drying at High Mass Transfer Biot Number | 2003 | |
| An Analytical Model of Phase Change Chemically Reacting Mixture Flows | 2003 | |
| Optimization of Wall Electrodes for Electro-Hydrodynamic Control of Natural Convection Effects During Solidification | 2003 | |
| Optimization of Intensities and Orientations of Magnets Controlling Melt Flow During Solidification | 2003 | |
| Magnetized Fiber Orientation and Concentration Control in Solidifying Composites | 2003 | |
| A Natural Convection Inverse Problem of Simultaneous Identification of Two Boundary Heat Fluxes in Rectangular Cavities | 2002 | |
| Inverse Convection Problems in Irregular Geometries | 2002 | |
| A Function Estimation Approach for the Identification of the Transient Inlet Profile in Parallel Plate Channels | 2000 | |
| Simultaneous Estimation of Two Boundary Heat Fluxes in Parallel Plate Channels | 2000 | |
| Transient Heat Conduction in a Two-Stroke Diesel Engine Piston | 2000 | |
| Estimation of the Heat Transfer Coefficient at the Surface of a Plate by Using the Conjugate Gradient Method | 1998 | |
| Estimation of the Heat Transfer Coefficient for the Spray Cooling of Continuously Cast | 1997 | |
| Transient Heat Transfer Analysis of a Diesel Engine Piston | 1996 | |
| Software para Geração de Malhas Bidimensionais em Geometria Irregular pelo Método de Diferencas Finitas - 2dgrid | 1995 | |
| Software para Estudo de Difusão de Calor Em Geometrias Irregulares Usando Diferenças Finitas | 1995 | |
| Método das Diferenças Finitas Aplicado A Problemas de Difusão Em Geometrias Irregulares | 1995 |