Paulo Pedro Kenedi
e-mail:
paulo.kenedi@cefet-rj.br
Linkedin:
Google Scholar:
ORCID:
não disponível no Lattes
Formação:
-
Universidade Federal do Rio de Janeiro
Engenharia Oceânica | Doutorado | 2001 - 2008
-
Universidade do Estado do Rio de Janeiro
Engenharia Elétrica Enfase Em Eletrônica | Graduação | 1990 - 1999
-
Pontifícia Universidade Católica do Rio de Janeiro
Engenharia Mecânica | Mestrado | 1988 - 1991
-
Universidade Federal Fluminense
Engenharia Mecânica | Graduação | 1982 - 1987
Laboratórios:
Nenhum laboratório cadastrado
Nuvens de Palavras:
Artigos:
Nenhum artigo cadastrado
Eventos:
(8.26% eventos com DOI)
| Titulo | DOI | Ano |
|---|---|---|
| Evaluating the Viscoelastic Load Share of Porcine Knee Ligaments | 2023 | |
| Influence of T-Stress on the Processed Zone Around Crack Tip in CFRP Plates | 2023 | |
| Activation of Bone Mass Maintenance Through Intramedullary Nail Dynamization | 2023 | |
| Residual Stress in Additive Manufactured Polymers | 2023 | |
| THE INFLUENCE OF THE VISCOUS PHENOMENON ON THE MECHANICAL PERFORMANCE OF A KNEE LIGAMENT | 10.26678/ABCM.ENEBI2022.EEB22-0070 | 2022 |
| Estimating the crack tip processed zone for a CFRP lamina | 2022 | |
| Multiscale procedure for notched CFRP plates ? an experimental validation | 2022 | |
| Fatigue and residual stress ? a deleterious combination | 2022 | |
| Modeling the viscoelastic load share between knee porcine ligaments | 2022 | |
| Thermographic Assessement of the Failure of an Orthotropic Composite Plate | 2021 | |
| Stress Concentration Assessment of Orthotropic Composites | 2021 | |
| The Influence of Sequential Loading in Residual Stress Generation | 2021 | |
| Fatigue strength evaluation of a 13%Cr supermartensitic stainless steel by the thermographic method | 10.1051/matecconf /202134902019 | 2021 |
| VISCOELASTIC MODELING OF PORCINE LIGAMENTS | 10.26678/ABCM.COBEM2021.COB2021-1122 | 2021 |
| Cladded Pipes Residual Stress Analysis | 10.26678/ABCM.COBEM2021.COB2021-0962 | 2021 |
| Qual o comportamento mecânico das estruturas ligamentares do joelho ? Caracterização mecânica dos ligamentos de joelho porcino | 2021 | |
| EXPERIMENTAL CHARACTERIZATION OF PORCINE LIGAMENTS | 10.26678/abcm.cobem2021.cob2021-1114 | 2021 |
| Callus Stiffness Evolution During the Healing Process - A Mechanical Approach | 2020 | |
| An Analytical Model for Knee Ligaments | 2020 | |
| Residual stress distribution in hyperstatic beams | 10.26678/ABCM.MECSOL2019.MSL19-0088 | 2019 |
| Sensitivity Analysis of Load Frequency and Number of Block Cycles on the Fatigue Limit Measurement by Thermographic Method | 10.26678/ABCM.MECSOL2019.MSL19-0068 | 2019 |
| Análise das distribuições de tensões na fratura consolidada do fêmur e na haste intramedular e após a retirada do implante | 2019 | |
| Influence of Residual Stresses in Fatigue Life of Partially Yielded Mechanical Parts | 2019 | |
| A Study of the Load Sharing of Knee Ligaments | 2019 | |
| ON THE LOADSHARE BETWEEN NAILING AND BONE | 10.26678/ABCM.ENEBI2018.EEB18-0170 | 2018 |
| Sharing load between bone and intermedullary nailing during the healing process | 2018 | |
| Elastoplastic Residual Stresses in Composite Beams - A Semi-Analytical Study | 2018 | |
| Analytical model of the loadshare between Nailing and Bone during the Healing Process | 2018 | |
| The stress distribution on Nailing and Bone during the healing process - A numerical model | 2018 | |
| Estudo Comparativo sobre Projeto a Fadiga de um Drillpipe | 10.26678/ABCM.CONEM2018.CON18-1188 | 2018 |
| Thermography ? A Faster Method to Obtain the Fatigue or Endurance Limit of Materials | 2017 | |
| A Study of Residual Stress in GLARE Laminates | 2017 | |
| On the Use of Thermographic Technique to Determine the Fatigue Limit of a Cold Drawn Carbon Steel | 2017 | |
| An analytical model for an intramedullary nailing | 2017 | |
| Fatigue Limit Determination of a Low Carbon Steel Using the Thermographic Technique | 10.26678/ABCM.COBEM2017.COB17-2395 | 2017 |
| A Note on elastoplastic residual stresses in composite beams | 2017 | |
| Bending Response of Sandwich Laminates | 2016 | |
| Fiber Influence in Crack Tip Plastic Zone | 2016 | |
| Propagation behavior of adhesive joints under mode II fatigue loading using energy-balance approach | 2016 | |
| Accessing the endurance limit by a thermography method | 2016 | |
| Mode I crack proagation testes in adhesively bonded joints | 2016 | |
| Intramedullary nailing: analytical and finite element approaches | 2016 | |
| Long term response of human bones tissues | 2016 | |
| A Low Cost Load Cell Approach | 2015 | |
| A Finite Element Study of Ostheosynthesis Plates | 2015 | |
| Influence of surface mechanical treatment on fatigue life of adhesively bonded joints under mode II loading | 2015 | |
| Analyzing the Effect of Polymer Intrusion at Interlocked Carcass Gaps | 2015 | |
| Umbilical Cables Installation ? A Crush Model | 2015 | |
| Stress and Strain Distribution of an Anisotropic Bone | 2015 | |
| Device for Fatigue Analysis of Shape Memory Alloy Wires | 2015 | |
| Influence of Surface Roughness on High-Cycle Fatigue Strength of Adhesive Joints under Mode II Loading | 2015 | |
| Finite Element Modeling of the Cutting Process of Drillpipes using a Blowout Preventer | 2015 | |
| Experimental Comparison of Tensile Armor Wires using Strain Gagesand Fiber Bragg Grating Techniches | 2014 | |
| Analytic and Numeric Modeling of an Interlocked Carcass | 2014 | |
| Analysis of Notch Sensitivity of High Strength Wires | 2014 | |
| Ostheosynthesis Plate: Analytical and Finite Element Approaches | 2014 | |
| Bone Anisotropy Influence - A Finite Element Analysis | 2014 | |
| Cladded Pipes Stress Analysis | 2014 | |
| Plate Stress Distribution during a Fractured Human Femur Healing Process | 2013 | |
| Experimental Comparison of Tensile Armor Wires using Strain Gages and Fiber Bragg Grating Techniques | 2013 | |
| Susceptibility Study of Stress Corrosion Cracking in Flexible Pipe Tensile Armors | 2013 | |
| The Influence of Plate Angular Position in Its Cross Section Stress Distribution | 2013 | |
| Modeling Stress Amplification Associated to Defects Promoted by Pipe Cold Bending | 2012 | |
| Performance Evaluation of High Strength Stell Chain Links Welded by Smaw Process Submitted to Fatigue Testing | 2012 | |
| Ostheosynthesis Plate Analytic Model | 2012 | |
| Modeling the Loading Share between a Ostheosynthesis Plate and a Human Femur | 2012 | |
| Ostheosynthesis Plate Stress Analysis | 2011 | |
| Evaluation of the Effetcs of CO2 Partial Pressure on the Corrosion Fatigue Behavior of Flexible Pipe Tensile Armor Wire | 2011 | |
| Acceptance Criteria for Maximum Defect Size for Pipeline Girth Welds using an ECA Approach | 2011 | |
| A Long Bone Composite Model | 2011 | |
| Limit States for Pipes under Combined Loads | 2011 | |
| Low Cost Alternatives for Viscous Damping Coefficient Evaluation | 2010 | |
| Yield Locus Models of Pressurized Pipes Under Combined Loads | 2010 | |
| Modeling of Pipe Cold Bending: A Finite Element Approach | 2010 | |
| Analytic Bi-Material Model of Human Long Bones | 2010 | |
| Avaliação de Propriedades Mecânicas de Elos de Amarra de Aço de Alta Resistência Submetidos a Ensaios de Fadiga | 2010 | |
| Avaliação Comparativa do Comportamento em Fadiga dos aços R4 produzidos por diferentes rotas | 2010 | |
| Analytic and finite element models of a human long bone | 2009 | |
| Stress Analysis Models of Human Long Bones - Analytic and Finite Element Approaches | 2009 | |
| Plastic Collapse of Pressurized Pipes Under Bending | 2009 | |
| Plastic Collapse of Pressurized Pipes | 2009 | |
| The Interaction between pressure and bending loadings in pipe collapse | 2008 | |
| A model of stress analysis of a human long bone | 2008 | |
| Modeling initial fracture patterns in human long bones | 2007 | |
| Limit Analysis of Straight and Curved Tubes | 2007 | |
| A Comparative Analysis of Failures Criteria Applied to Long Bones | 2007 | |
| Conception of a Fatigue Test Device for High Strength Steel Wires | 2007 | |
| Implementation of Statical Variational Formulations to an Elastic Curved Beam Element | 2006 | |
| Using an Experimental Approach to Estimate Damping Coefficient | 2006 | |
| A Finite Element Program for Elastic Straight and Curved Beams | 2006 | |
| A Comparative Analysis of Mechanical Design of a Fillet Welded Tube Using Analytic and Numerical Methods | 2005 | |
| On the Hypothesis and Limitations of Traditional Methodologies for Mechanical Design of a Fillet Welded Simple Structure | 2005 | |
| Um Sistema de Condicionamento de Sinais para Extensômetria | 2005 | |
| Modeling the Influence of a Road Obstacle on the Dynamic Behavior of an Off-Road Vehicle | 2005 | |
| Repotencialização de um Sistema de Aquisição de Dados de uma Máquina de Ensaios de Tração | 2004 | |
| Finite Element Residual Stress Analysis Applied to Offshore Studless Chain Links | 2004 | |
| Modeling Different Configurations for a Front Suspension of an Off-Road Vehicle Mini-Baja | 2004 | |
| A Simple Model to Study Comfort and Road-Holding Aspects of an Off-Road Vehicle | 2004 | |
| Effect of Mean Load on the Fatigue Life of Studless Chain Links | 2004 | |
| Modeling Residual stresses in Repaired Welded Steel Plates using the Finite Element Method | 2004 | |
| Analysis of the Influence of Mechanical Properties on the Residual Stress in Offshore Chain links Using the Finite Element Method | 2003 | |
| Analysis of the Influence of Residual Stresses in the Fatigue Life of Welded Plates Using the Finite Element Method. | 2003 | |
| Finite Element and Analytic Stress Analysis of Offshore Studless Chain Links | 2003 | |
| Dynamical Analysis of an Off-Road Vehicle Suspension | 2003 | |
| Modeling Residual Stresses in Offshore Chain Links using Finite Element Method | 2003 | |
| Dynamic Testing Device for Off-Road Vehicle Suspensions Analysis | 2003 | |
| Experimental and Numerical Analysis of an Off-road Vehicle Suspension | 2003 | |
| Elastoplastic Analysis of the Residual Stress in Chain Links | 2002 | |
| Analysis of the Transmissibility of the Rear Suspension of a Mini-Baja Vehicle | 2002 | |
| Modeling the Residual Life of Recovered Shackles | 2001 | |
| Programa de Cooperação CEFET-RJ / Fachhochschle de Munique: Uma Experiência Inovadora no Ensino de Engenharia Mecânica | 2001 | |
| Residual Stress Analysis of Studless Chain Links Repaired by Welding | 2001 | |
| Modelagem da Rigidez de Flanges Aparafusados | 2001 | |
| Dynamic Experimental Analysis of a Mini-Baja Vehicle Front Suspension | 2001 | |
| Implementação de Baixo Custo de Servo-Controle em uma Máquina Convencional de Ensaios de Rochas | 1998 | |
| Propagação por Fadiga de Trincas Superficiais e de Canto em Soldas Molhadas | 1996 | |
| Alguns Comentarios sobre a Propagação de Trincas Superficiais por Fadiga | 1995 | |
| Fatigue Propagation of Superficial Cracks in Wet Welds. | 1995 | |
| Correlação entre a Taxa de Fadiga e o Laço de Histerese Elastoplástica | 1995 | |
| Avaliação de Taxas de Fadiga pelo Metodo epslon x N | 1992 | |
| Estimativa da Taxa de Propagação de Trincas de Fadiga à partir de Propriedades Mecânicas Cíclicas | 1991 |