Luis Volnei Sudati Sagrilo

Instituição:

Universidade Federal do Rio de Janeiro

Centro:

Centro de Tecnologia

Unidade:

Coordenação dos Programas de Pós-Graduação de Engenharia

Departamento:

Programa de Engenharia Civil/COPPE

ORCID:

não disponível no Lattes


Formação:

  • Universidade Federal do Rio de Janeiro

    Engenharia Civil | Doutorado | 1990 - 1994

  • Universidade Federal do Rio de Janeiro

    Engenharia Civil | Mestrado | 1987 - 1989

  • Universidade Federal de Santa Maria

    Engenharia Civil | Graduação | 1982 - 1986
Laboratórios:
Nuvens de Palavras:
Artigos:

(79.37% artigos com DOI)

Titulo DOI Ano
Reliability-based fatigue inspection planning for mooring chains of floating systems 10.1016/j.ress.2023.109775 2024
A Practical Procedure for Fatigue Assessment of Mooring Line Chains With Pitting Corrosion 10.1115/1.4064855 2024
Load Models Representative of Brazilian Actual Traffic in Girder-Type Short-Span Highway Bridges 10.3390/app13021032 2023
APPLIED DEEP LEARNING FOR SLENDER MARINE STRUCTURE DYNAMIC ANALYSIS 10.1115/1.4052243 2022
Long-term fatigue analysis of mooring lines considering wind-sea and swell waves using the Univariate Dimension-Reduction Method 10.1016/j.apor.2021.102997 2022
Semi-empirical equations to predict the bisymmetric dry and wet hydrostatic collapse strengths of flexible pipes 10.1016/j.apor.2022.103129 2022
Assessing the Impact of Climate Change on the Fatigue Life of Offshore Structures 10.1115/1.4052677 2022
A multi-dimensional long-term joint probability model for environmental parameters 10.1016/j.oceaneng.2022.111470 2022
Comparative Study of Extreme Value Estimation Approaches for Mooring Lines Top Tension Responses 10.1115/1.4047792 2021
Wellhead fatigue analysis considering the effect of wind-sea and swell waves by using Univariate Dimension Reduction Method 10.1016/j.petrol.2021.108989 2021
Evaluating the impact of climate change on offshore structures design: A practical case study 10.1016/j.apor.2019.101992 2020
An Investigation of the Bisymmetric Hydrostatic Collapse of Flexible Pipes Based on Equivalent Layer Approaches 10.1115/1.4046170 2020
Application of Taylor diagram in the evaluation of joint environmental distributions' performances 10.1007/s40868-020-00081-5 2020
Extreme Response Prediction of Steel Risers Using a Four Parameter Distribution 10.1115/1.4041893 2019
Long-term analysis using a scatter diagram key region to evaluate the extreme response of steel risers 10.1016/j.marstruc.2018.11.011 2019
A modal finite element approach to predict the lateral buckling failure of the tensile armors in flexible pipes 10.1016/j.marstruc.2019.05.006 2019
Parametric interpolation method for probabilistic fatigue analysis of steel risers 10.1016/j.apor.2019.05.023 2019
Statistical Uncertainty Analysis in Time-Domain Fatigue Assessment of Steel Risers 10.1115/1.4038583 2018
Response-based environmental conditions for the design of steel catenary risers 10.1016/j.apor.2017.12.001 2018
Lazy-Wave Buoyancy Length Reduction Based on Fatigue Reliability Analysis 10.1115/1.4038937 2018
Alternative Solutions of the Geodesic Differential Equations Applied to the Mechanical Analysis of the Tensile Armors of Flexible Pipes under Bending 10.1155/2018/1040973 2018
Hybrid Parabolic Interpolation - Artificial Neural Network Method (HPI-ANNM) for long-term extreme response estimation of steel risers 10.1016/j.apor.2018.05.008 2018
Neural Networks Applied to the Wave-Induced Fatigue Analysis of Steel Risers 10.1155/2018/2719682 2018
A Finite Element Model for the Instability Analysis of Flexible Pipes Tensile Armor Wires 10.17265/2159-5275/2017.03.006 2017
A study on the axial behavior of bonded flexible marine hoses 10.1007/s40868-016-0015-x 2016
Probabilistic fatigue analysis of marine structures using the univariate dimension-reduction method 10.1016/j.marstruc.2016.07.008 2016
Stochastic analysis of TLP?s tendons 10.1007/s40868-016-0018-7 2016
Conventional and Linear Statistical Moments Applied in Extreme Value Analysis of Non-Gaussian Response of Jack-Ups 10.1115/1.4028899 2015
Towards actual brazilian traffic load models for short span highway bridges 10.1590/S1983-41952015000200005 2015
Fatigue Reliability Analysis for Brace-Column Connection Details in a Semisubmersible Hull 10.1115/1.4031493 2015
The effect of some uncertainties associated to the environmental contour lines definition on the extreme response of an FPSO under hurricane conditions 10.1016/j.apor.2015.09.005 2015
On the Extreme Value Analysis of the Response of a Turret Moored FPSO 10.1115/1.4006759 2012
A Theoretical Approach to Predict the Fatigue Life of Flexible Pipes 10.1155/2012/983819 2012
Investigative Study on the Extreme Load Events Approach Applied in the RSAA Extreme Response Analysis 2012
A Study on the Holding Capacity Safety Factors for Torpedo Anchors 10.1155/2012/102618 2012
Spectral analysis of simulated acceleration records of deepwater SCR for identification of modal parameters 10.1016/j.oceaneng.2012.10.010 2012
A JOINT PROBABILITY MODEL FOR ENVIRONMENTAL PARAMETERS 10.1115/1.4001962 2011
On the long-term response of marine structures 10.1016/j.apor.2011.02.005 2011
Reliability of the ultrasonic inspection by numerical simulation technique 10.1784/insi.2011.53.11.603 2011
A Straightforward Approach for Using Single Time Domain Simulations to Assess Characteristic Extreme Responses 10.1016/j.oceaneng.2011.07.003 2011
Long-term response analysis of FPSO mooring systems 10.1016/j.apor.2011.05.003 | 2011
Extreme Value Analysis of Jack-Up Dynamic Response Parameters 2011
Pattern Recognition Techniques Applied to the Detection and Classification of Weldings Defects by Magnetic Tests 10.1080/09349840903381655 2010
Structural Reliability Analysis of Limit State Functions with Multiple Design Points Using Evolutionary Strategies 2009
Neural Networks in the Dynamic Response Analysis of Slender Marine Structures 10.1016/j.apor.2008.01.002 2008
Reliability-based design criterion for TLP tendons 10.1016/j.apor.2008.05.001 2008
Reliability of non-destructive test techniques in the inspection of pipelines used in the oil industry 10.1016/j.ijpvp.2008.05.001 2008
Reliability-based comparative study for mooring lines design criteria 10.1016/j.apor.2007.05.004 2007
MFL signals and artificial neural networks applied to detection and classification of pipe weld defects 10.1016/j.ndteint.2006.04.003 2006
Reliability of the manual and automatic ultrasonic technique in the detection of pipe weld defects 10.1784/insi.2006.48.11.649 2006
An Automated Ultrasonic System for Hull Inspection in Ship-Based Oil Production Units 10.1016/j.apor.2004.02.004 2004
A Coupled Approach for Dynamic Analysis of CALM Systems 10.1016/S0141-1187(02)00008-1 2002
Evaluation of the relevant characteristic parameters of welding defects and probability of correct classification using linear classifiers 2002
The PoD curve for the detection of planar defects using a multi-channel ultrasonic system 2002
On the Extreme Response of Heave-Excited Flexible Risers 10.1016/S0141-1187(00)00010-9 2000
Um Procedimento Simplificado Para Analise de Confiabilidade de Estruturas de Plataformas Maritimas Fixas 1997
A Procedure For Random Fatigue Analysis Of Offshore Structures 1995
Ritz Method For Dynamic Analysis Of Structures Under Random Loading 1995
Reassessment Of Jackets Using Nonlinear And Structural Reliability Analysis 1995
A Computer Strategy To Assess The Structural Reliability Of Jackets 1995
Analise de Confiabilidade Estrutural de Juntas de Plataformas Offshore 1993
Reliability Computer Analysis Of Offshore Platforms 1991
Analise de Confiabilidade Estrutural de Porticos Espaciais Usando Computacao Paralela 1988
Eventos:

(0.00% eventos com DOI)

Titulo DOI Ano
The Effect of Pitting Corrosion on Fatigue Performance of Mooring Line Chain Links 2022
An Artificial Neural Network Approach for the Fatigue Analysis of Slender Marine Structures 2022
A Hybrid Time-Frequency Domain Approach for Estimating Mooring Lines Dynamic Response 2022
A Monte Carlo Approach for Fatigue Analysis of Mooring Lines Subjected to Simultaneous Environmental Actions 2022
Análise de Sensibilidade de um Método Expedito para Obtenção da Resposta Dinâmica em Linhas de Ancoragem 2022
Stochastic Fatigue Analysis Using Adaptive Control Variates in Monte Carlo Simulation 2022
Fatigue Reliability-Based Inspection Planning Methodology for Corroded Mooring Chain Links 2021
RELIABILITY ANALYSIS OF MOORING LINES OF FLOATING STRUCTURES UNDER CORROSION AND MATERIAL DEGRADATION 2020
AN EFFICIENT IMPORTANCE SAMPLING METHOD FOR THE LONG-TERM MOORING LINES RESPONSE ESTIMATION CONSIDERING WIND SEA AND SWELL 2020
ON THE USE OF ARTIFICIAL NEURAL NETWORKS FOR ESTIMATING THE LONG-TERM MOORING LINES RESPONSE CONSIDERING WIND SEA AND SWELL 2020
LONG-TERM ANALYSIS APPLIED TO MOORING SYSTEMS DESIGN 2020
The Impact of Climate Change on the Long‑term Response of Offshore Structures: A Study Case 2019
Simplifying Methods for Fatigue Analysis of Risers 2019
Extreme Value Estimation of Mooring Lines Top Tension 2019
An Approach for Estimating the Corrosion Rates on Aging FPSO Hull Structures 2019
EQUIVALENT LAYER APPROACHES TO PREDICT THE BISYMMETRIC HYDROSTATIC COLLAPSE STRENGTH OF FLEXIBLE PIPES 2018
Neural Networks Applied to the Prediction of Flexible Pipes Armor Wires Configuration Under Pure Bending 2017
LAZY-WAVE BUOYANCY LENGTH REDUCTION BASED ON FATIGUE RELIABILITY ANALYSIS 2017
EXTREME RESPONSE PREDICTION OF STEEL RISERS USING A FOUR PARAMETER DISTRIBUTION 2017
Extreme Value Analyses of Dynamic Response Parameters of a Wind Tower Structure Under Short-Term Nonlinear Irregular Seastate 2017
Optimization of Flexible Pipes Dynamic Analysis Using Artificial Neural Networks 2016
Resposta Analítica para a Previsão de Flambagem Lateral de Arames da Armadura de Tração de Dutos Flexíveis 2016
A Simple Finite Element Model for Instability Analysis of Flexible Pipes Tensile Armor Wire 2016
EFFICIENT PROBABILISTIC FATIGUE ANALYSIS OF A RISER SUSPENDED AND MOORED BY CHAINS 2015
Fatigue Reliability Assessment for Flexible Riser Armour Wires 2015
Artificial Neural Networks Applied to Flexible Pipes Fatigue Calculations 2015
Comparison Between Finite Element Model and an Artificial Neural Networks Procedure for Riser Analysis 2015
A Semi-Analytical Methodology to Evaluate Long-Term Responses at TDZ of Catenary Risers 2015
Artificial Neural Networks Applied to Flexible Pipes Sthocastic Nonlinear Dynamic Analysis 2015
Statistical Uncertainty Analysis in Time-Domain Fatigue Assessment of Steel Risers 2015
An Unbounded Flexible Pipe Finite Element Model 2015
Metodologias para Estimativa de Resposta Extrema de Plataformas Fixas 2015
A Joint Probability Model for Environmental Parameters of Wave, Wind and Current Using Nataf Transform 2015
Fatigue Reliability Assessment for Brace-Column Details in a Semi-Submersible Hull 2014
A Methodology to Predict the Remaining Fatigue Life of a Damaged Flexible Pipe 2014
Behavior of Offloading Marine Hose Submitted to Bend 2014
Comportamento de Mangotes de Descarga Submetidos à Tração Pura 2014
A simple approach for determining the load capacity of torpedo anchors embedded in cohesive soils 2013
An Aleternative Methodology to Evaluate the Fatigue Life of Risers Based on Regular Waves 2013
LONG-TERM EXTREME RESPONSE OF MARINE STRUCTURES CONSIDERING THE COMBINATION OF FIRST AND SECOND ORDER WAVE EFFECTS 2013
BASE DE DADOS DE TRÁFEGO TENDO EM VISTA NOVOS MODELOS DE CARGAS MÓVEIS PARA PONTES RODOVIÁRIAS NO BRASIL 2012
METODOLOGÍA DE EVENTOS DE CARGA EXTREMA APLICADA EN LA DETERMINACIÓN DE LA RESPUESTA EXTREMA DE SCRs 2012
Methodology for Fatigue Analysis in Flexible Pipes Based on Structural Reliability Considering S-N bi-linear Curve 2012
Safety Factors for Fatigue Analysis of Flexible Pipes Based on Structural Reliability 2012
Calibration of Design Conditions Based on Long Term Top Tension for Catenary Risers 2012
Conventional and Linear Statistical Moments Applied in Extreme Value Analysis of Non-Gaussian Response of Jack-Ups 2012
Fatigue Analysis of a 6? Flexible Pipe with Broken Tensile Armor Wires 2012
Riser Analysis for a New Dry Completion Concept for a Monocolumn Platform 2011
ANÁLISE NÃO-LINEAR DE RISERS EM COMPUTADORES MULTICORE 2011
ESTUDO INVESTIGATIVO DO MÉTODO DAS JANELAS APLICADO NA ANÁLISE DE EXTREMOS DO RSAA 2011
SIMULAÇÃO DE TRÁFEGO VISANDO NOVOS MODELOS DE CARGAS MÓVEIS PARA PONTES RODOVIÁRIAS 2011
Fatigue Assessment of a Flexible Pipe With Broken Tensile Armor Wires 2011
Extreme Value Analysis of the Response of a Turret-moored FPSO 2010
Safety Factors Evaluation for Torpedo Anchors 2010
Reliability-based Design of Torpedo Anchors 2010
Extreme Value Analysis of Jack-Ups 2010
Analysis of Uncertainties in the Estimation of Fatigue Damage in Marine Structures by the Bootstrap Technique 2010
VIM and Wave-Frequency Fatigue Damage Analysis for SCRs Connected to Monocolumn Platforms 2009
Polynomial Models Applied to the Analysis of Slender Marine Structures 2009
A Methodology to Evaluate Fatigue Life of Flexible Pipes 2009
FATIGUE DAMAGE EVALUATION FOR STEEL RISERS CONNECTED TO A MONOCOLUMN PLATFORM 2009
ANÁLISE DE INCERTEZAS NO CÁLCULO DO DANO DE ESTRUTURAS 2009
ANÁLISE DE FADIGA EM RISERS RÍGIDOS CONSIDERANDO VARIAÇÃO DE PARÂMETROS DA INTERAÇÃO SOLO-ESTRUTURA E TRINCHEIRAS 2009
COMPARAÇÃO DE METODOLOGIAS DETERMINÍSTICAS PARA A VERIFICAÇÃO DE TENSÕES EXTREMAS EM RISERS RÍGIDOS 2009
EXTREME VALUES ANALYSIS OF DYNAMIC RESPONSE PARAMETERS FOR JACK-UPS 2009
Joint Probability Model for Environmental Parameters 2008
Análise Numérica de Movimentos Induzidos por Vórtices em Plataformas Flutuantes 2008
Metodologia para Análise de Fadiga de Dutos Flexíveis Baseada em Confiabilidade Estrututral 2008
Parametric Study of Flexible Riser Service Life 2007
A Reliabillity-Based Comparative Study for Mooring Lines Design Criteria 2006
Reliability-Based Design Criterion for TLP Tendons 2006
Estatistica de Longo Prazo da Resposta Aplicada à Análise de Risers Metálicos 2006
Risers Mistos Aço-Titanio para Aplicações em Águas Profundas 2006
Procedimento Weibll-POT na Avaliação de Respostas Extremas de Risers Metálicos 2006
Neural Networks in the Analysis of Dynamic Response of Slender Structures 2006
Efeito da Confiabilidade Alvo no Critério de Projeto para os Tendões de uma TLP 2006
Reliability of TLP Tendons Under Storm Sea States 2005
Steel Lazy Wave Riser Design: API-RP-2RD and DNV-OS-F201 Criteria 2005
Comparing Measured and Calculeted Forces of a Manifold Deployment in 940 Water Depth 2003
Systems Reliability with Multiple Design Points Using Evolutionary Strategies 2003
On the Extreme Analysis Applied to Moored Floating Platforms 2003
A Comparative Reliability Analysis between Two Design Options for the Number of Tendons in a Tension Leg Platform (TLP) 2003
A Case Study on the Evaluation of Floating Hose Forces ian a CALM System 2002
Reliability Based Assesment of Safety Factors for the Design of Floating Systems using Long-Term Statistics 2002
Automated Multi-Channel System for Ultrasound Inspection on a FPSO Type Ship Hull 2002
Wells and Risers Constraints in Ultra Deep Water 2002
LRFD Code Format fo Accounting Long-term Variation of Multiple Load Effects 2002
Reliability-Based Assesment and Calibration of Safety Factors for the Design of Floating Systems Using Long-Term Statistics 2001
Employing Structural Reliability Analysis in Inspection Planning of Fixed Offshore Structures 2000
Plano de Inspeção de Linhas de Ancoragem Baseado em Confiabilidade 2000
Fatigue Analysis in Mooring Lines of Floating Production Systems in Multidirectional Waves 1999
Fatigue and Reliability Analysis of Mooring Lines of Oil Production Ships in Deepwater 1998
Análise de Fadiga das Linhas de Ancoragem de um FPSO 1998
Reliability-Based Fatigue Inspection Planning Of Fixed Offshore Structures 1997
Determination Of The Long Term Distribution Of Forces And Stresses In Platforms Located Offshore Brazil 1997
Fatigue Reliability Of A Tension Leg Platform For Campos Basin 1997
Using Strucutral Reliability Analysis In Inspection Planning Of Offshore Structures 1997
Random Fatigue Analysis Of A Jacket Type Offshore Structure: Time And Frequency-Domain Approaches 1997
Structural Reliability Analysis of Floating Production Systems 1997
Reassessment Of Fixed Offshore Structures Using Reliability And Nonlinear Structural Analyses 1996
Uma Estrategia Computacional Para Analise de Confiabilidade Estruturalde Plataformas Offshore 1995
Fatigue Life Assessment Of Cracked Tubular Joints 1995
O Metodo de Ritz Aplicado A Analise Dinamica de Estruturas Solicitadas Por Carregamentos Espectrais 1995
Analise de Confiabilidade de Plataformas Maritimas Fixas 1995
A Computational Strategy To Assess The Structural Reliability Of Jackets 1995
Reassessment Of Jackets Using Nonlinear And Reliability Structural Analyses 1995
Ritz Method For Dynamic Analysis Of Structures Under Random Loading 1995
A Procedure For Random Fatigue Analysis Of Offshore Structures 1995
Dual Time-Frequency Random Analysis Of A Compliant Tower 1993
Structural Reliability Analysis Of Cracked Tubular Joints 1993
Analise de Confiabilidade Estrutural de Juntas de Plataformas Offshore 1992
Application Of Reliability Analysis In Offshore Structures 1991
Reliability Computer Analysis Of Offshore Platforms 1991
Algumas Aplicacoes de Confiabilidade Em Estruturas Offshore 1991
Publicações:
Minha Rede: