Marysilvia Ferreira da Costa

Instituição:

Universidade Federal do Rio de Janeiro

Centro:

Centro de Tecnologia

Unidade:

Coordenação dos Programas de Pós-Graduação de Engenharia

Departamento:

Programa de Engenharia Metalúrgica/COPPE

e-mail:

marysilvia.costa@coppe.ufrj.br

Linkedin:

Google Scholar:

ORCID:

https://orcid.org/0000-0001-6394-8075

Formação:
  • Massachusetts Institute of Technology

    | Pós-Doutorado | 1995 - 1996
  • Universidade de São Paulo

    Química (Físico-Química) | Doutorado | 1991 - 1994
  • Universidade de São Paulo

    Química (Físico-Química) | Mestrado | 1989 - 1991
  • Universidade de São Paulo

    Bacharelado Em Química | Graduação | 1985 - 1988
Laboratórios:
Nuvens de Palavras:
Artigos:

(73.02% artigos com DOI)

Titulo DOI Ano
The chemical impact of oil fluids in the morphology and thermal properties of the polyamide 11 used in flexible lines 10.1007/s44245-024-00032-z 2024
Recycling decommissioned polyamide 11: An approach to handle a previously unwanted material 10.1002/app.55195 2024
MÉTODO ALTERNATIVO DE FOTOPOLIMERIZAÇÃO DE RESINAS COMPOSTAS PARA TESTE DE FLEXÃO 10.22409/ijosd.v1i63.59499 2024
Application of two-layer viscoplasticity model to predict a semicrystalline polymer response under compression and microindentation 10.1002/pen.25902 2022
Morphological changes of polyamide 11 through the corrected inherent viscosity plateau 10.1002/app.52223 2022
Using XPS and FTIR spectroscopies to investigate Polyamide 11 degradation on aging flexible risers 10.1016/j.polymdegradstab.2021.109787 2021
Creep behavior of in-service flexible flowline polyamide 11 10.1016/j.polymertesting.2019.106205 2020
Exploring the Potential Use of Clean Scrap PVDF as Matrix for Conductive Composites Based on Graphite, Carbon Black and Hybrids: Electromagnetic Interference Shielding Effectiveness (EMI SE) 10.1007/s10924-020-01753-4 2020
Temperature-time large strain mechanical model for Poly(vinylidene fluoride) 10.1016/j.polymertesting.2019.106312 2020
Reprocessed Poly(vinylidene fluoride): a comparative approach for mechanical recycling purposes 10.1016/j.mtcomm.2020.101269 2020
Computational modeling of viscoplastic polymeric material response during micro-indentation tests 10.1007/s40430-020-02511-2 2020
Characterization of Properties of Poly(vinylidene Fluoride) Using Instrumented Microindentation Test 10.1002/masy.202000136 2020
Kinetics of thermal degradation and lifetime study of poly(vinylidene fluoride) (PVDF) subjected to bioethanol fuel accelerated aging 10.1016/j.heliyon.2020.e04573 2020
TD-NMR analysis of structural evolution in PVDF induced by stress relaxation 10.1016/j.polymertesting.2018.03.051 2018
Fatigue and quasi-static analysis of a new type of surface preparation used for the CFRP repair of steel offshore structures 10.1080/00218464.2018.1443815 2018
Data on tensile tests and NMR measurements of poly(vinilidene fluoride) before and after stress relaxation 10.1016/j.dib.2018.04.145 2018
Comparisons of complex modulus provided by different DMA 10.1016/j.polymertesting.2018.10.034 2018
Characterization of seawater and weather aged polyurethane elastomer for bend stiffeners 10.1016/j.polymertesting.2017.02.012 2017
Effect of LED-LCU light irradiance distribution on mechanical properties of resin based materials 10.1016/j.msec.2016.02.060 2016
Structural and Thermo-mechanical Evaluation of Two Engineering Thermoplastic Polymers in Contact with Ethanol Fuel from Sugarcane 10.1590/1980-5373-mr-2015-0480 2016
Study of an alternative material to manufacture layered hydraulic hoses 10.1016/j.polymertesting.2016.05.003 2016
Thermomechanical properties and long-term behavior evaluation of poly(vinylidene fluoride) (PVDF) exposed to bioethanol fuel under heating 10.1007/s10853-016-0159-2 2016
Bend stiffener nonlinear viscoelastic time domain formulation 10.1016/j.marstruc.2016.08.001 2016
Evaluation of polymerization shrinkage of dental composites by an optical method 10.1016/j.msec.2014.11.008 2015
Evaluation of metronidazole-loaded poly(3-hydroxybutyrate) membranes to potential application in periodontitis treatment 10.1002/jbm.b.33357 2015
Odontological light-emitting diode light-curing unit beam quality 10.1117/1.jbo.20.5.055005 2015
The use of nano- and micro-instrumented indentation tests to evaluate viscoelastic behavior of poly(vinylidene fluoride) (PVDF) 10.1016/j.polymertesting.2013.12.006 2014
Production of 3D scaffolds applied to tissue engineering using chitosan swelling as a porogenic agent 10.1002/app.38735 2013
Site-selective photofragmentation of chlorinated polymeric films observed around the chlorine K-edge 10.1016/j.chemphys.2013.01.003 2013
3D Printing of Poly(3-hydroxybutyrate) Porous Structures Using Selective Laser Sintering 10.1002/masy.201100237 2012
Effect of process parameters on the properties of selective laser sintered Poly(3-hydroxybutyrate) scaffolds for bone tissue engineering 10.1080/17452759.2012.738551 2012
Influence of thermal or chemical degradation on the frictional force of an experimental coated NiTi wire 10.2319/042810-232.1 2011
Preparation and characterization of composites based on polyhydroxybutyrate and waste powder from coconut fibers processing 10.1002/pen.21669 2010
Optimization of process conditions, characterization and mechanical properties of silane crosslinked high-density polyethylene 10.1016/j.msea.2010.03.102 2010
Adsorção de Fibronectina a Arcabouços de Polihidroxibutirato Aplicáveis à Engenharia òssea 2009
The Effects of Water Absorption on an Ester Vinyl Resin System 2009
Influence of hydrogenated amorphous carbon coatings on the formation of paraffin deposits 2006
Degree of conversion versus depth of polymerization of an ormocer dental restoration composite by FT-IR spectroscopy 10.1002/app.23248 2006
Photon stimulated ion desorption studies from poly(sulphone) using synchrotron radiation in a single-bunch mode 2006
Ionic Desorption in Valence- and Core- Excited Polymers: Poly(vinyl Chloride) and Poly(vinylidene Chloride) 2006
Desenvolvimento de uma resina éster vinílica para moldagem por enrolamento filamentar 2006
Preparação e Caracterização de Estruturas Porosas de Poli(3-hidroxibutirato) 2006
Site-specific fragmentation in poly(vinyl chloride) (PVC) photoexcited around the Cl 2p edge 2004
Ionic desorption in valence- and core- excited poly(vinyl chloride) 2004
Desenvolvimento de revestimentos poliméricos para linhas flexíveis submersas 2003
Mesoscopic Patterns in POMA Spin-coated Films: a Systematic Study 2002
On the Origin of the Plateau in Surface-Pressure Isotherms of Aromatic Carboxylic Acids 2002
Undoped polyaniline anticorrosive properties 2001
Cooperativity of phospolipid reorganization upon interaction of dipyridamole with surface monolayer on water 2001
Electron Transfer Between Adjacent Layers in Self-Assembled Films 2000
Non-equilibrium adsorbed polymer layers via hydrogen bonding 10.1002/(SICI)1521-396X(199905)173:1 1999
Neutron Reflectivity Investigations of Self-Assembled Conjugated Polyion Multilayers 10.1021/la960285m 1996
Enhancement Of Light Emitting Diodes Based On Self-Assembled Heterostructures Of Poly(P-Phenylene Vinylene) 10.1063/1.363369 1996
Conducting Polymers (for Langmuir-Blodgett film fabrication) 1996
Fabrication and properties of light-emitting diodes based on self-assembled multilayers of poly(phenylene vinylene) 10.1063/1.362421 1996
Molecular-Level Processing of Conjugated Polymers. 1. Layer-by-Layer Manipulation of Conjugated Polyions 10.1021/ma00125a012 1995
Self-assembly films of polyacids and doped poly(o-alkoxyanilines) 10.1016/0379-6779(94)03154-x 1995
Molecular self-assembly of conjugated polyions: a new process for fabricating multilayer thin film heterostructures 10.1016/0040-6090(94)90575-4 1994
Hydrogen evolution reaction on Ni-S electrodes in alkaline solutions 10.1016/0360-3199(94)90173-2 1994
Filmes Langmuir-Blodgett de Polímeros Condutores 1994
Mechanistic study of the hydrogen evolution reaction on Ni-Zn and Ni-S cathodes 10.1007/bf00721956 1993
Progress on the development of activated cathodes for water electrolysis 10.1016/0360-3199(92)90094-d 1992
Chloroform-soluble poly(o-methoxyaniline) for ultra-thin film fabrication 10.1016/0040-6090(92)90786-b 1992
Eventos:

(2.78% eventos com DOI)

Titulo DOI Ano
Human Resource Program for Integrity Management and Life Assessment: Subsea Cases Application 10.4043/32377-ms 2023
Assessment of a Polyamide Used in Flexible Pipes After Aging in Deoxygenated Water 10.1115/OMAE2020-19248 2020
Unveiling PA11 degradation utilized on flexible risers using spectroscopic techniques 2020
CARACTERIZAÇÃO MICROESTRUTURAL DO PVDF PELO ENSAIO DE MICROINDENTAÇÃO INSTRUMENTADA 2019
AVALIAÇÃO DE CASCO EM MATERIAL COMPÓSITO PARA SEPARADOR SUBMARINO 2019
COMPARISON OF COMPLEX MODULUS PROVIDED BY THREE DIFFERENT DYNAMIC MECHANICAL ANALYZERS 10.21452/bccm4.2018.05.01 2018
Caracterização do Residuo Pós-Industrial de PVDF Visando Potencial Reutilização 2017
A CRITICAL ANALYSIS ON THE COMPLEX MODULUS PROVIDED BY DMA 2017
AVALIAÇÃO DAS PROPRIEDADES MECÂNICAS DE HNBR ENVELHECIDO EM BIODIESEL OU EM ATMOSFERA OXIDANTE 2017
COMPORTAMENTO DE RELAXAÇÃO DE TENSÃO DO POLI(FLUORETO DE VINILIDENO) 2017
Whitening Generation in PVDF Under Cyclic Loading 2015
Fluororubbers Aged Under Continuous Compression Set at Elevated Temperatures 2015
Evaluation of Aged PVDF by Instrumented Indentation Test 2015
FRACTURE TOUGHNESS OF HDPE EVALUATED BY FATIGUE AND NOTCH PRECRACKING 2015
GAMMA-RADIATED POLYETHYLENE ANALYZED BY ULTRASONIC NDE. 2015
Mechanical Behavior Characterization of Polyurethane Used in Bend Stiffeners 2015
Compósito de Polipropileno Reciclado e Pó de Coco 2015
Avaliação do PVDF envelhecido em etanol combustível: difusão, cristalinidade e propriedades térmicas dinâmico-mecânicas 2015
Modelagem por Elementos Finitos do Ensaio de Indentação Instrumentada em Poli(fluoreto de vinilideno) 2015
Study of an Alternative Material for the Manufacture of Subsea Umbilical Hydraulic Hoses 2015
EFFECT OF SUPERCRITICAL CO2 ON PVDF 2014
FATIGUE PRECRACKING METHODOLOGY FOR HDPE 2014
Influência da Taxa de Carregamento sob Propriedades Mecânicas do Poli(fluoreto de vinilideno) Obtidas por Microindentação Instrumentada. 2014
Avaliação da cristalinidade e das propriedades mecânicas do poli (éter éter cetona) (PEEK) envelhecido em etanol combustível. 2013
AVALIAÇÃO DOS EFEITOS DA EXPOSIÇÃO DO POLIFLUORETO DE VINILIDENO (PVDF) À ATMOSFERA DE DIÓXIDO DE CARBONO SUPERCRÍTICO (SCCO2) 2013
GERAÇÃO DO EFEITO WHITENING EM POLIFLUORETO DE VINILIDENO (PVDF) SOB CARREGAMENTO CÍCLICO 2013
QUIMIOMECÂNICA DE UMA BORRACHA FLUORADA VDF-HFP ENVELHECIDA EM AR E SOB COMPRESSÃO 2013
Study of the poly(ether ether ketone) (PEEK) aged in ethanol by instrumented indentation technique 2012
The Effect of Yttria and Alumina Powder on the Transformation Behavior of Polydimetilsiloxane Derived Ceramics 2012
AVALIAÇÃO DO EFEITO DA CRISTALIZAÇÃO SECUNDÁRIA EM COMPÓSITOS DE POLIHIDROXIBUTIRATO E PÓ DE COCO SILANIZADO 2011
AVALIAÇÃO DO ENVELHECIMENTO DE PVDF POR MICRODUREZA INSTRUMENTADA 2011
DETERMINAÇÃO DE PARÂMETROS VISCOPLÁSTICOS DO POLIFLUORETO DE VINILIDENO 2011
INTEGRIDADE ESTRUTURAL EM MATERIAIS POLIMERICOS 2011
PRODUÇÃO DE ESTRUTURAS TRIDIMENSIONAIS DE PHB UTILIZANDO SINTERIZAÇÃO SELETIVA A LASER 2011
INFLUÊNCIA DA CONCENTRAÇÃO DE ADITIVOS EM BIOCOMPÓSITOS À BASE DE POLIHIDROXIBUTIRATO E PÓ DE COCO, UTILIZANDO UM PLANEJAMENTO FATORIAL 2011
EVALUATION OF THE MECHANICAL AND CHEMICAL PROPERTIES OF THE POLY(ETHER-ETHER-KETONE) AGED IN ETHANOL 2011
Efeito da potência do laser nas propriedades de arcabouços porosos de PHB produzidos por prototipagem rápida 2010
Characterization of Poly(3-hydroxybutirate) composites filled with acetylated coir dust 2010
Estudo das Propriedades de PVDF Envelhecido e Não Envelhecido em Petróleo 2010
Temperature Dependent Mechanical Behavior of Polyvinylidene Fluoride 2010
Effect of chitosan addition in polyhydroxybutyrate scaffolds properties 2009
Evaluation of additives content (natural filler, plasticizer and, nucleating agent and compatibilizing agent) on the production of biodegradable PHB-based composite 2009
Arcabouços Porosos Fabricados por Emulsificação para Aplicação em Engenharia de Tecidos 2009
Influência da Temperatura no Comportamento Mecânico do Polifluoreto de Vinilideno 2009
Characteization of Biodegradable Composites Based on Polyhydroxybutyrate (PHB) and Coir Dust 2009
Degradação Quimiomecânica de Recobrimentos Epóxi Novolac 2008
POLYMETHYSILOXANE DERIVED CERAMICS: INFLUENCE OF PYROLYSIS TEMPERATURE ON CERAMIC PHASES 2008
OTMIZAÇÃO DO PROCESSAMENTO E PROPRIEDADES MECANICAS DE POLIETILENO RETICULADO POR SILANO ENVELHECIDO E NÃO EVELHCIDO EM ALCOOL COMBUSTVEL 2008
REPAIR TECHNIQUES FOR FLEXIBLE PIPE EXTERNAL SHEATH 2008
Biomimetização de suportes porosos de poli(3 - hidroxiburato) (P(3HB)) por imobilização de fibronectina para aplicação em engenharia óssea 2007
Compósitos biodegradáveis: matrizes poliméricas reforçadas com resíduos do processamento de fibras de casca de coco 2007
INFLUENCIA DE RECOBRIMENTOS DE CARBONO AMORFO NO PROCESSO DE DEPOSIÇÃO DE PARAFINA. 2005
CHARACTERIZATION OF PARAFFIN THIN FILMS DEPOSITED ON DIFFERENT SUBSTRATS BY AFM. 2005
ESTUDO COMPARATIVO DA RESISTÊNCIA AO IMPACTO ENTRE POLIAMIDA 6 E 11 ATRAVÉS DO ENSAIO IZOD INSTRUMENTADO 2005
Envelhecimento de Poliamida 6 e Poliamida 11 em Água e Óleo 2005
Avaliação Comparativa das Propriedades Mecânicas de Tração da Poliamida 11 e Poliamida 6 em Diferentes Estágios de Degradação 2005
Utilização do Método Ultrasonico na Avaliação da Degradação da Poliamida 11 2005
IN SITU INCORPORATION OF METALLIC PHTHALOCYANINES INTO A POLYPYRROLE MATRIX AND ITS EFFECT ON THE ELECTROACTIVITY OF THE POLYMER FILMS 2005
Development of an Ester Vinyil Polymerc Matrix for Composites Designed for the Filament Windind Process 2005
Desenvolvimento de Matriz Polimérica Visando a Produção de Material Compósitos Através da Técnica de Enrolamento Filamentar 2005
MORPHOLOGY OF n-PARAFFIN FILMS GROWN FROM HEPTANE SOLUTION INVESTIGATED BY AFM. 2004
INFLUENCE OF DIFFERENT CARBON-BASED SUBSTRATES ON THE GROWTH OF PARAFFIN CRYSTALS. 2004
CARACTERIZAÇÃO MECÂNICA DE TRÊS RESINAS UTILIZADAS EM RESTAURAÇÃO DIRETA DE DENTES POSTERIORES 2004
CONTRAÇÃO DE POLIMERIZAÇÃO DE MATERIAIS RESTAURADORES DENTAIS À BASE DE RESINA. 2004
Avaliação do Grau de Conversão de Compósitos Dentais Poliméricos Utilizando Espectroscopia no Infravermelho 2003
PREPARAÇÃO E CARACTERIZAÇÃO DE ESTRUTURAS POROSAS DE POLI (3-HIDROXIBUTIRATO) 2003
DESENVOLVIMENTO DE REVESTIMENTOS POLIMÉRICOS PARA LINHAS FLEXÍVEIS 2003
FTIR Spectroscopy of PAni-RUPY in Langmuir Monolayers 2002
Porous Structure of Poly(3-hydroxybutyrate) for Tissue Engineering Applications 2002
Fotodegradação de polímeros induzida por fótons de UVV : estudos de desosção iônica In: 2002
Photodegration of polymers induced by VUV photons: ionic desorption studies 2002
Avaliação de Rugosidade de Superfície de Materiais Estéticos Diretos 2002
Propriedades Anticorrosivas da Polianilina não Dopada 2001
Mesoscopic Patterns in POMA Spin-coated Films: a Systematic Study 2001
Mesoscopic patterns in poly(o-metoxy aniline) spin coated films 2001
AFM and Conductivity Measurements of Doped Polyaniline Films Produced by Different Synthetic Routes 2001
Interconnection between morphology and conductivity of doped polyaniline films 2001
Avaliação de Materiais a Base de Epóxi para Recobrimento Interno de Dutos de Transporte 2001
Propriedades Mecânicas de Epóxis Utilizadas no Recobrimento Utilizadas no Recobrimento Interno de Oleodutos e Gasodutos 2001
Photodegradation of polymers induced by VUV photons: ionic desorption studies 2001
Produção e Caracterização de Filmes de Polímeros Condutores 2000
Junction characterization of doped/non-doped polyaniline films 2000
Dipyridamole interaction with phospholipid Langmuir monolayers: Fluorescence microscopy and FTIR studies at the air-water interface 2000
FTIR spectroscopy of aromatic carboxylic acids in Langmuir monolayers 2000
A Polianilina como Revestimento Anti-corrosivo na sua Forma Pura e como Blenda com Cera de Carnaúba 2000
Avaliação Técnica de Revestimentos para Proteção Contra Corrosão Interna de Dutos 2000
Mecânica da Fratura Aplicada a Polímeros Termoplásticos 1999
Recobrimento Interno de Dutos para Minimização de Depósitos, Fricção e Corrosão 1999
Junções Retificadoras em Filmes de Polianilina 1999
Liminescence in Self-Assembled Polymeric Multilayers Controlled by Electron Transfer 1999
Aspects Concerning Conjugated Conducting Polymers 1998
Preparation Of Parent Polyaniline Thin Films Using The Self-Assembly Technique 1998
Electrical Properties of non-Uniformly Protonated Polyaniline (PAni) 1998
Ultra-Thin Polymeric Films for Electronic Device Applications 1998
Light Emitting Thin Film Devices Based On Self-Assembled Multilaye Hetostructures Of PPV 1996
The Application of Multilayer Self-Assembly Techniques to the Fabrication of Polymer LEDs 1996
Fabricação de Dispositivos Emissores de Luz Utilizando-se a Técnica de Auto-Montagem de Filmes Finos Poliméricos 1996
Interlayer Interaction In Self-Assembled Poly(P-Phenylene Vinylene) Multilayer Hetrostructures: Implications For Light Emitting And Photorectifying Diodes 1995
Filmes Condutores Produzidos Por Auto-Montagem 1995
Self-Assembled multilayers of electroactive polymers: from highly conducting transparent thin films to light emitting diodes 1995
Estudo da Fotoluminescência de Heteroestruturas de Poli(p-fenileno vinileno) Fabricados pela Técnica de Auto-Montagem 1995
Fabrication of Ultra-Thin Conducting Polymer Films via the Langmuir-Blodgett and the Self-Assembly Technique 1995
Luminescence Behavior Of Self-Assembled Multilayer Heterostructure Of Poly(Phenylene Vinylene) 1994
Langmuir-Blodgett Films from Conjugated Polymers 1994
Layer-by-Layer Molecular Self-assembly of Conducting Polymer Heterostructures 1994
Neutron and Reflectivity Characterization of Self-Assembled Films of Conducting Polymers 1994
Molecular Self-Assembly of Conducting Polymers: A New Layer-by-Layer Thin Film Deposition Process 1993
Molecular Self-Assembly of Conjugated Polyions: A New Process for Fabricating Multilayer Thin film Heterostructures 1993
Publicações:
Minha Rede: