Antonio Carlos Ferreira

Instituição:

Universidade Federal do Rio de Janeiro

Centro:

Centro de Tecnologia

Unidade:

Coordenação dos Programas de Pós-Graduação de Engenharia

Departamento:

Programa de Engenharia Elétrica/COPPE

ORCID:

https://orcid.org/0000-0002-4423-9318


Formação:
  • University of Cambridge

    Engenharia Elética | Doutorado | 1993 - 1996
  • Universidade Federal do Rio de Janeiro

    Engenharia Elétrica | Mestrado | 1987 - 1991
  • Universidade Federal do Rio de Janeiro

    Engenharia Elétrica | Graduação | 1981 - 1987
Laboratórios:
Nenhum laboratório cadastrado
Nuvens de Palavras:
Artigos:
Nenhum artigo cadastrado
Eventos:

(4.76% eventos com DOI)

Titulo DOI Ano
Avaliação da Resposta em Frequência do Enrolamento de Transformadores de Médio Porte Considerando Diferentes Condutores 2023
Three-Phase Model for Studying Turn-to-Turn Transient Voltage Distribution in Rotating Machine Stator Windings 2021
Influence of the Surge Rise-Time on the Turn-to-Turn Transient Voltage Distribution in Rotating Machine Stator Windings using a Three-Phase Model 2021
End-Windings Influence in the Transient Voltage Distribution in Electrical Machine Windings Using Finite Elements Method 10.1109/IEMDC.2019.8785294 2019
End-Windings Modeling to Study Transient Voltage Distribution in Machine Stator Windings Using Finite Elements Method 2019
Development of a Linear Motor for Urban Magnetically Levitated Vehicles Using an Innovative Workbench Topology 2019
Transient Voltage Distribution in Induction Motor Stator Windings Using Finite Elements Method 10.1109/iecon.2018.8595148 2018
Brushless Cascaded Doubly -fed Induction Machine: Modeling and Simulation 2017
External rotor reluctance machine for a kinetic energy storage system 2016
External rotor switched reluctance machine for a kinetic energy storage system 10.1109/iecon.2016.7793958 2016
The experimental line of the MagLev-Cobra project for urban transportation 2016
Evaluation of linear induction motors with two different topologies by FEM 2015
Stator Flux Orientation Control of the Cascaded Doubly Fed Induction Machine 2015
MagLev-Cobra: an urban transportation system for highly populated cities. In: 3rd International Scientific Conference on MagLev Transportation Systems and Technology 2015
Comparation Between a Superconductor and a Conventional Linear Synchronous Motor Using the Finite Element Method 2014
Project of a Synchronous Linear Drive Using Superconducting Coils 2014
Application of IEC 61788-3 for the determination of the DC critical current of high temperature superconductors do second generation 2014
Applying Regenerative Braking to the MagLev-Cobra Linear Induction Traction Motor 2014
Regenerative braking of a linear induction motor used for the traction of a MAGLEV vehicle 2013
FORCE AND CURRENT CHARACTERISTICS OF A LINEAR INDUCTION MOTOR USED FOR THE TRACTION OF A MAGLEV VEHICLE 2013
AVALIAÇÃO DA CURVA V-I DE MATERIAIS SUPERCONDUTORES PARA APLICAÇÕES NO SETOR ELÉTRICO. 2013
Projeto de um Motor Supercondutor Linear com Fitas de Segunda Geração 2013
Influência Da Geometria Do Rotor No Torque De Um Motor Síncrono Supercondutor 2012
ARMAZENADORES DE ENERGIA MAGNÉTICOS SUPERCONDUTORES - SMES: APLICAÇÕES, VIABILIDADE TÉCNICA E ECONÔMICA. 2012
Identificação de Parâmetros de Geradores Síncronos Utilizando Dados Operacionais 2012
Utilização de SMES para estabilização de geradores marítimos 2012
LONG DISTANCE TRANSMISSION ? SEGMENTED AC TRANSMISSION LINES 2011
Análise De Transformadores De Potência Utilizando Um Método Baseado Nos Ensaios De Resposta Em Frequência 2011
Segmented AC lines as a modern solution for Long-distance Transmission 2011
Comprovação Experimental dos Pontos de Operação de uma Máquina de Indução em Cascata de Dupla Alimentação 2010
Steady State Analysis of the Doubly Fed Cascaded Induction Machine 2010
Operating points of a doubly fed cascaded induction machine 2009
Análise de auto-excitação e curto-circuito capacitivo em geradores síncronos conectados a grandes sistemas de transmissão CCAT E CAAT 2009
Comparative study of the inductances of an induction motor with rotor eccentricities 2009
Proposta de um Método de Identificação de Parâmetros de um Circuito equivalente de um Transformador de Potência 2008
Superconductor Magnetic Levitation Force Calculations in a Linear Bearing Using the Finite Element Method 2008
The flux creep effect in superconducting magnetic bearings levitation force 10.1088/1742-6596/97/1/012216 2008
Reflexos da manobrabilidade de usinas nucleares na operação de sistema elétrico 2007
Avaliação de isolamentos no ar dentro de ambiente metálico aterrado 2006
Power Transformer Equivalent Circuit Identification by Artificial Neural Network using Frequency Response Analysis 2006
Modelagem e Simulação de Supercondutores Aplicada ao Projeto de Mancais Magnéticos Rotativos 2006
Experimental Validation of a Dynamic Model of a SRM used in Superconducting Bearing Flywheel Energy Storage System 2006
Comparative Analysis of two Topologies for Rotational Superconducting Magnetic Bearings 2006
Modelagem de supercondutores pelo modelo de estado crítico 2006
Feasibility study of an HTS-Maglev line at the Federal University of Rio de Janeiro 2006
Estimação em ordem reduzida da função de transferência de um transformador de potência 2006
Power transformer equivalent circuit identification using frequency respónse analysis 2006
Modeling a SRM Based Flywheel Energy Storage System 2005
Calculation of polyphase induction motor parameters using the finite element method 2005
The Brazilian SQL MAGLEV Train Prototype 2005
Utilização das Equações de London para a Modelagem de Supercondutores 2004
Halbach array superconducting magnetic bearing for a flywheel energy storage system 2004
Identificação De Parâmetros De Máquinas Síncronas Utilizando Redes Neurais Artificiais Especialistas E Resultados De Ensaios De Resposta Em Freqüência 2004
Dynamic model of a SRM based flywheel energy storage system 2004
Force Ripple Attenuation in Air Cored Permanent Magnet Linear Synchronous Motor 2004
Voltage Sags Compensation Using a Superconducting Flywheel Energy Storage System 2004
A Superconducting Magnetic Levitation Train Prototype in Closed Loop Track 2004
Compensating Characteristics of a Brushless Doubly-Fed Machine 2003
Compensador Dinâmico de Afundamento de Tensão com Armazenamento Cinético de Energia 2003
A Superconducting Levitated Small Scale Vehicle with Linear Synchronous Motor 2003
Scalar Control of the Brushless Doubly-fed Induction Machine 2003
Linear Synchronous Motor Desig using FEM 2003
A superconducting high-speed flywheel energy storage system 2003
A superconducting levitation vehicle prototype 2003
Improving power quality with a variable speed synchronous condenser 2002
Application of the brushless doubly-fed machine as a variable speed synchronous condenser 2002
High-speed flywheel system with switched reluctance motor/generator 2002
Laboratory Prototype of a Superconducting Levitation Train 2002
Long Armature Linear Synchronous Motor with NdfeB field winding 2002
The Current State of the Brazilian Project for a Superconducting Magnetic Levitation Train 2002
Flywheel Generator With Switched Reluctance Machine 2002
Uso de uma Máquina de Relutância Variável para Armazenamento Energético: Uma Aplicação para Qualidade de Energia 2002
Estudo de perdas energéticas em uma máquina de relutância variável 2002
Long armature LSM with NdFeB excitation field 2002
A utilização do método dos elementos finitos para otimização de máquinas elétricas no desenvolvimento de armazenadores cinéticos de energia 2002
Ensaio de resposta em freqüência em máquina síncrona de pólos salientes utilizando o método dos elementos finitos 2002
Superconducting Magnetic Levitation Train Prototype 2001
Long Armature Synchronous Motor for Magnetically Levitated Vehicle 2001
Variable Speed Synchronous Condenser Using Doubly-Fed Induction Machine 2001
Theoretical model validation of an axial magnetic bearing 2000
The Brazilian Project for a Superconducting Magnetic Levitation Train 2000
Voltage Control Using Variable Speed Synchronous Condenser 2000
Protótipo de um veículo utilizando levitação magnética supercondutora 1999
Iron Loss And Saturation In Brushless Doubly-Fed Machines 1997
Publicações:
Minha Rede: